Flame-Retardant Construction Adhesive on Board

DELO Industrial Adhesives has developed a new two-component adhesive for aircraft interiors. DELO-DUOPOX AB8390 is particularly well suited for bonding of light-weight sandwich panels.

Before adhesives can be used in aircraft interiors, they are subjected to various tests to prove their suitability. The epoxy resin DELO-DUOPOX AB8390 independently fulfils, among others, the requirements regarding fire protection (FST, flammability, smoke density and toxicity) according to CS/FAR part 25 §25.853 (a)(1)(ii)/(d) and ABD0031. This construction adhesive has been developed especially for use in aircraft interiors and features important properties such as good resistance in the temperature range from -55 °C to +85 °C. The adhesive is colorfast in white and will remain so, which has been proved in a storage test during a time period of 1,000 hours at +70 °C and an air humidity of 85%. In contrast to other adhesives which can yellow strongly, DELO-DUOPOX AB8390 offers a robust color result for high-quality applications.

Dispensing on the fly

The DELO-AUTOMIX dispensing system allows the thixotropic epoxy resin to be quickly and easily applied, just like a one-component adhesive. During manual processing, the processing time of 30 minutes also allows a rework on the component. The adhesive cures completely at room temperature. To reduce the cycle times in production, higher temperatures, e.g. 60 °C, may accelerate the curing process.

Due to the optimized dispensing behavior in combination with the high resistances, this flame-retardant construction adhesive is not only predestined for load-bearing connections with inserts but also for adhesive bonding in the field of ditch & pot applications.

Currently DELO-DUOPOX AB8390 is used by the Tier-1 supplier FACC in Austria for the adhesive bonding of overhead stowage compartments.

J.v.G. Thoma GmbH is delivering a DESERT turnkey production line to Brazil, the first of its kind and hopefully the first in many breakthroughs to leave the factory floor on their way to the largest country in South America. With a capacity of 30 MW, this is a small semi-automatic DESERT production line, but still a flagship in terms of DESERT solar module production and electricity generation in the country, now fully functional and ready to start with operation.

The machinery consists of DESERT production machines for high-efficiency DESERT solar modules built specifically for extreme hot climate, such as can be seen in deserts or in tropical areas. Made solely in Germany and built using the latest in DESERT and TROPIC module production, the systems inlcudes all cutting-edge technology.

Certified DESERT solar modules, DESERT containers, DESERT power plants and DESERT manufacturing machinery built using pioneering DESERT and TROPICS technology are now fully set up, and ready to perform. But powering on the machinery has been a long time coming. Up until recently, this advanced piece of equipment had been waiting for clearance at a port in Brazil. Now that the formalities have been dealt with, both J.v.G. Thoma and its customer in Brazil can get production under way.

J.v.G. Thoma GmbH is a company whose vision has always been to harness the infinite power of the sun and convert it into an inexhaustible supply of energy. But a vision such as this requires global reach, and this project has opened new doors. Brazil is not only a gateway to South American cooperation, but also the launchpad to international reach and expansion.

Following the delivery of this initial order, J.v.G. Thoma GmbH will be looking forward to an ongoing collaboration with the Brazilian company. From setup and initial training to setting the scene for a ramp up, J.v.G. Thoma will be there to provide expertise and assistance. Moreover, the company will be jointly responsible, along with the client, for the successful integration of the DESERT solar module factory.

In the future, bigger DESERT power plants will be set up on Brazilian soil, and together with existing turnkey production systems, they intend to take up a large share of the products and assets this sector will possess locally. J.v.G. Thoma plans to build up a local network of sales agents that can extend a premium offering to neighbouring countries in South America. Eventually, the company hopes to be able to expand its customer base to clients in North America.

Hans Thoma, general manager from the Thoma-group, is eager to acquire a substantial market share in Brazil, a growing country with tremendous potential for solar energy output. Having complied with local official procedures (Inmetro, TÜV, Fraunhofer CSP) and cleared the way for future business collaboration, he expresses his hope that the solar industry will henceforth expand quickly.

”Being able to introduce Brazil to the infinite opportunities of a solar industry is a privilege for J.v.G. Thoma GmbH, and one that we are extremely grateful for. At the same time, this placed the ball squarely in our court, and the pressure to get the ball rolling quickly was high. Now that the lengthy initial formalities are out of the way, we can focus on making this project a success.“

The first DESERT solar module production in BRAZIL! Lets go ....
J.v.G. Thoma GmbH is delivering a DESERT turnkey production line to Brazil, the first of its kind and hopefully the first in many breakthroughs to leave the factory floor on their way to the largest country in South America. With a capacity of 30 MW, this is a small semi-automatic DESERT production line, but still a flagship in terms of DESERT solar module production and electricity generation in the country, now fully functional and ready to start with operation.

The machinery consists of DESERT production machines for high-efficiency DESERT solar modules built specifically for extreme hot climate, such as can be seen in deserts or in tropical areas. Made solely in Germany and built using the latest in DESERT and TROPIC module production, the systems inlcudes all cutting-edge technology.

Certified DESERT solar modules, DESERT containers, DESERT power plants and DESERT manufacturing machinery built using pioneering DESERT and TROPICS technology are now fully set up, and ready to perform. But powering on the machinery has been a long time coming. Up until recently, this advanced piece of equipment had been waiting for clearance at a port in Brazil. Now that the formalities have been dealt with, both J.v.G. Thoma and its customer in Brazil can get production under way.

J.v.G. Thoma GmbH is a company whose vision has always been to harness the infinite power of the sun and convert it into an inexhaustible supply of energy. But a vision such as this requires global reach, and this project has opened new doors. Brazil is not only a gateway to South American cooperation, but also the launchpad to international reach and expansion.

Following the delivery of this initial order, J.v.G. Thoma GmbH will be looking forward to an ongoing collaboration with the Brazilian company. From setup and initial training to setting the scene for a ramp up, J.v.G. Thoma will be there to provide expertise and assistance. Moreover, the company will be jointly responsible, along with the client, for the successful integration of the DESERT solar module factory.

In the future, bigger DESERT power plants will be set up on Brazilian soil, and together with existing turnkey production systems, they intend to take up a large share of the products and assets this sector will possess locally. J.v.G. Thoma plans to build up a local network of sales agents that can extend a premium offering to neighbouring countries in South America. Eventually, the company hopes to be able to expand its customer base to clients in North America.

Hans Thoma, general manager from the Thoma-group, is eager to acquire a substantial market share in Brazil, a growing country with tremendous potential for solar energy output. Having complied with local official procedures (Inmetro, TÜV, Fraunhofer CSP) and cleared the way for future business collaboration, he expresses his hope that the solar industry will henceforth expand quickly.

”Being able to introduce Brazil to the infinite opportunities of a solar industry is a privilege for J.v.G. Thoma GmbH, and one that we are extremely grateful for. At the same time, this placed the ball squarely in our court, and the pressure to get the ball rolling quickly was high. Now that the lengthy initial formalities are out of the way, we can focus on making this project a success.“

The first DESERT solar module production in BRAZIL! Let
Source: DELO Industrie Klebstoffe GmbH & Co. KGaA