SolarPower Europe Outlines 10 Policy Priorities for Solar & Storage

SolarPower Europe is calling on the European Commission to address the needs of solar power and storage technology in its upcoming Energy Union Package. The association’s Task Force on Solar & Storage has created 10 Policy Asks that are crucial to develop an appropriate framework for solar & storage.

Riccardo Amoroso, Chief Innovation Officer of Enel Green Power and Vice President of SolarPower Europe, says, “The industry is being very successful in bringing down the cost of stationary battery storage and in improving its ability to provide efficient services and solutions to the market. Today we need European policy makers to put in place stable regulatory conditions including clear definitions and an appropriate market design to ensure a level playing field among competing solution providers. Such conditions will allow for further innovations and corresponding market growth.”

While the solar power market in Europe has been in a transition phase over the last few years, the combination of solar and storage is the perfect fit to lift solar power to the next growth level.

Michael Schmela, Executive Advisor at SolarPower Europe, comments “If the regulatory environment for solar & storage is set effectively, solar power will strongly contribute to reaching the 27% target for renewable energy in 2030 in the current draft RE directive. Implementing our 10 policy priorities for solar & storage in the Energy Union Package would already go a big part of the way to achieving the realistic 35% target SolarPower Europe would like to see in the new REDII 2030 directive.”

The benefits solar & storage bring to the energy system and European consumers are manifold. Solar & battery storage allows consumers to implement new and smart business models that maximize the value of solar electricity. It unlocks solar’s flexibility potential at the consumer level – consumers could now offer services to grid operators. On a system level, solar generation can be used more cost-effectively together with storage.

Thomas Doering, Policy Analyst at SolarPower Europe and Coordinator of the Task Force Solar & Storage says “Solar & battery storage installations represent an important flexibility option for the entire energy system, enabling to inject or absorb electricity generated by a solar system when the system requires it. Together, solar & battery storage allows continuous short term supply of clean and cheap electricity, overcoming the variability of solar electricity generation.”

Solar & storage – 10 policy priorities
The combination of solar and storage is the perfect fit to bring penetration of solar power to the next growth level in Europe, to achieve 2030 RES targets, flexibility requests across the EU and active consumers. To allow the combination of solar & storage to provide its full potential, we ask for a dynamic and adequate regulatory environment to keep pace with the quickly changing technology developments. The following 10 policy asks – at both European and national levels – are crucial to develop an appropriate framework for solar & storage:

DEFINITION
1. An EU-wide definition of “electricity storage” should be introduced in the revised Electricity Directive. This definition should:
a. establish electricity storage as a new type of asset on the grid that can provide multiple services – next to traditional transmission, distribution and generation assets
b. acknowledge that electricity storage provides value as it can both absorb and release electricity from and into the grid
c. set the ground for a fair taxation of stored electricity, in particular to avoid double taxation
d. recognize the commercial value of flexibility services provided at system as well as local level and encourage energy planners, regulators and system operators to integrate electricity storage in their planning

2. Clarifying the definition and rights of active consumers regarding storage: the REDII should enshrine the right for consumers to selfgenerate and consume renewable energy:
- Consumers need to be able to own and operate storage devices without discrimination.
- The stored electricity must be free of specific taxes or charges.

MARKET DESIGN
3. An appropriate reform of the intraday markets is crucial for enabling large-scale solar plants to better take on balancing responsibilities. This will also push for new solutions combining solar & storage.

4. A real market for selling and procuring flexibility services must be developed, both at transmission and distribution levels.
a. Distributed energy resources should have full market access, being able to stack value across existing and new markets wherever appropriate.
b. Minimum sizing requirements should be reduced
c. Products on the ancillary services markets should properly value the high accuracy, fast response, synthetic inertia etc. that storage can provide.
d. Contract durations in ancillary service markets should not be unnecessarily short as such durations may penalise potential solutions with high CAPEX or which cannot easily be redesigned to suit short contract durations.
e. DSOs should have the right to procure flexibility services from transmission and distribution level.

5. A clear basis regarding rules and circumstances under which TSOs and DSOs may operate storage solutions must be developed.

6. Targeted solar tenders can incorporate as a weighting selection criteria the co-location of solar & storage (for instance on islands). The ability to avoid grid congestion might be a lever for deploying storage solutions.

7. The exchange of electricity on a community scale via collective selfconsumption schemes must be possible for active consumers. Third party intermediaries should be allowed to operate active consumers’ electricity storage devices via pooling platforms, such as virtual power plants or peer-to-peer mechanisms.

8. Clear rules regarding data transparency and access for all stakeholders are required: Data transparency & access are foundational enablers for stakeholders to proactively develop innovations in grid design and operation that increase reliability as well as safety. Next to this, data access is an important pillar to advancing solar & storage solutions both at the consumer level (for determining economics) as well as at the grid level (for integrating distributed energy resources). Without data sharing, key stakeholders are sidelined from proposing new solutions that drive innovation and increase consumer choice.

REMUNERATION
9. Active consumers should be remunerated fairly for providing their devices to deliver services that support the electric grid. To achieve fair remuneration and service provision, tariffs must provide consumers and service providers with price signals to be able to act upon market developments and system needs.

10. Distribution grid tariffs must be “fit for the energy transition”. They should incentivise consumers to invest in technologies such as storage and advanced meters to allow the smartening of distributed solar PV by ensuring a balanced approach between volumetric and capacitybased grid tariffs. This balance can evolve over time (grid tariffs are set every 4 to 5 years on average in Europe) to accompany the progressive penetration of solar and storage.

J.v.G. Thoma GmbH is delivering a DESERT turnkey production line to Brazil, the first of its kind and hopefully the first in many breakthroughs to leave the factory floor on their way to the largest country in South America. With a capacity of 30 MW, this is a small semi-automatic DESERT production line, but still a flagship in terms of DESERT solar module production and electricity generation in the country, now fully functional and ready to start with operation.

The machinery consists of DESERT production machines for high-efficiency DESERT solar modules built specifically for extreme hot climate, such as can be seen in deserts or in tropical areas. Made solely in Germany and built using the latest in DESERT and TROPIC module production, the systems inlcudes all cutting-edge technology.

Certified DESERT solar modules, DESERT containers, DESERT power plants and DESERT manufacturing machinery built using pioneering DESERT and TROPICS technology are now fully set up, and ready to perform. But powering on the machinery has been a long time coming. Up until recently, this advanced piece of equipment had been waiting for clearance at a port in Brazil. Now that the formalities have been dealt with, both J.v.G. Thoma and its customer in Brazil can get production under way.

J.v.G. Thoma GmbH is a company whose vision has always been to harness the infinite power of the sun and convert it into an inexhaustible supply of energy. But a vision such as this requires global reach, and this project has opened new doors. Brazil is not only a gateway to South American cooperation, but also the launchpad to international reach and expansion.

Following the delivery of this initial order, J.v.G. Thoma GmbH will be looking forward to an ongoing collaboration with the Brazilian company. From setup and initial training to setting the scene for a ramp up, J.v.G. Thoma will be there to provide expertise and assistance. Moreover, the company will be jointly responsible, along with the client, for the successful integration of the DESERT solar module factory.

In the future, bigger DESERT power plants will be set up on Brazilian soil, and together with existing turnkey production systems, they intend to take up a large share of the products and assets this sector will possess locally. J.v.G. Thoma plans to build up a local network of sales agents that can extend a premium offering to neighbouring countries in South America. Eventually, the company hopes to be able to expand its customer base to clients in North America.

Hans Thoma, general manager from the Thoma-group, is eager to acquire a substantial market share in Brazil, a growing country with tremendous potential for solar energy output. Having complied with local official procedures (Inmetro, TÜV, Fraunhofer CSP) and cleared the way for future business collaboration, he expresses his hope that the solar industry will henceforth expand quickly.

”Being able to introduce Brazil to the infinite opportunities of a solar industry is a privilege for J.v.G. Thoma GmbH, and one that we are extremely grateful for. At the same time, this placed the ball squarely in our court, and the pressure to get the ball rolling quickly was high. Now that the lengthy initial formalities are out of the way, we can focus on making this project a success.“

The first DESERT solar module production in BRAZIL! Lets go ....
J.v.G. Thoma GmbH is delivering a DESERT turnkey production line to Brazil, the first of its kind and hopefully the first in many breakthroughs to leave the factory floor on their way to the largest country in South America. With a capacity of 30 MW, this is a small semi-automatic DESERT production line, but still a flagship in terms of DESERT solar module production and electricity generation in the country, now fully functional and ready to start with operation.

The machinery consists of DESERT production machines for high-efficiency DESERT solar modules built specifically for extreme hot climate, such as can be seen in deserts or in tropical areas. Made solely in Germany and built using the latest in DESERT and TROPIC module production, the systems inlcudes all cutting-edge technology.

Certified DESERT solar modules, DESERT containers, DESERT power plants and DESERT manufacturing machinery built using pioneering DESERT and TROPICS technology are now fully set up, and ready to perform. But powering on the machinery has been a long time coming. Up until recently, this advanced piece of equipment had been waiting for clearance at a port in Brazil. Now that the formalities have been dealt with, both J.v.G. Thoma and its customer in Brazil can get production under way.

J.v.G. Thoma GmbH is a company whose vision has always been to harness the infinite power of the sun and convert it into an inexhaustible supply of energy. But a vision such as this requires global reach, and this project has opened new doors. Brazil is not only a gateway to South American cooperation, but also the launchpad to international reach and expansion.

Following the delivery of this initial order, J.v.G. Thoma GmbH will be looking forward to an ongoing collaboration with the Brazilian company. From setup and initial training to setting the scene for a ramp up, J.v.G. Thoma will be there to provide expertise and assistance. Moreover, the company will be jointly responsible, along with the client, for the successful integration of the DESERT solar module factory.

In the future, bigger DESERT power plants will be set up on Brazilian soil, and together with existing turnkey production systems, they intend to take up a large share of the products and assets this sector will possess locally. J.v.G. Thoma plans to build up a local network of sales agents that can extend a premium offering to neighbouring countries in South America. Eventually, the company hopes to be able to expand its customer base to clients in North America.

Hans Thoma, general manager from the Thoma-group, is eager to acquire a substantial market share in Brazil, a growing country with tremendous potential for solar energy output. Having complied with local official procedures (Inmetro, TÜV, Fraunhofer CSP) and cleared the way for future business collaboration, he expresses his hope that the solar industry will henceforth expand quickly.

”Being able to introduce Brazil to the infinite opportunities of a solar industry is a privilege for J.v.G. Thoma GmbH, and one that we are extremely grateful for. At the same time, this placed the ball squarely in our court, and the pressure to get the ball rolling quickly was high. Now that the lengthy initial formalities are out of the way, we can focus on making this project a success.“

The first DESERT solar module production in BRAZIL! Let
Source: SolarPower Europe