Sustainable architecture and AGC glass: A perfect partnership for the SIEEB building in China

A few months ago, Beijing’s Tsinghua University became home to the futuristic Sino-Italian Ecological Energy Efficient Building (SIEEB). This 40 m tall structure (total surface area: 20,000 m2) shows that it is possible to perfectly combine contemporary architecture and environmental sustainability in Beijing.

AGC Flat Glass Europe has made an active contribution to developing the façade systems for the SIEEB by providing technical support for the project and supplying glass for use in its construction. One product used for this project is Stopray Elite, a high-quality ‘magnetron-coated’* glass that has proven to be the perfect solution for this complex project.

The SIEEB is the headquarters of a Chinese-Italian training and research centre for environmental protection and energy conservation. The building, with its impressive transparent walls, is a fine example for China of low environmental impact construction. The result of close cooperation between Italian engineers, architects and researchers, the SIEEB makes full use of the most advanced technology the construction sector has to offer.

The SIEEB project, the brainchild of famous Italian architect Mario Cucinella, has an incredibly light and transparent architectural profile. Cucinella created this effect using a complex system of façades in single and double-skin glass, depending on their exposure.

Throughout the development stage, he focused on designing the façade systems. Several different glass solutions were devised with a view to optimising light and energy transmission. The south façade features a single-skin glass system that capitalises on the transparency of Stopray Elite glass (LT = 66%).

The low solar factor of Stopray Elite (40%) ensures that the building’s users are protected from the sun, while photovoltaic panels and tile overhangs provide shade. A different system was implemented for the inner façade, which does not have any terraces. It uses a dynamic system of transparent blinds made with Stopsol reflective pyrolytic glass*. The east and west façades, however, feature a double-skin system. The internal cladding was also made with Stopray glass, while silk-screen printed float glass was used for the external cladding.

AGC Flat Glass Europe contributed its solar control technology and know-how to this project. In doing so it helped the SIEEB - a prototype for low environmental impact construction – set a shining example for the entire construction industry.

* Soft or magnetron coating: applied to cold glass off-line via vacuum magnetron sputtering. This technique is performed in special chambers called magnetrons and can be used to manufacture a wide range of high-performance products.

* Hard or pyrolytic coating: applied to hot glass (float glass, on-line) at 600°C using two special techniques: liquid mixture spraying and gas mixture spraying (chemical vapour deposition). AGC Flat Glass Europe uses these two processes to develop glass products with a variety of characteristics.

Source: Glass International
For further information, please contact Helen Bird at Glass International