Fratelli Pezza Srl

Via Ing. V. Balduzzi, 29 , 24023 Clusone (Bg)
Italy

Telephone +39 0346 27841
Fax +39 0346 27842
info@fratellipezza.com

Trade fair hall

  • Hall 16 / D18
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 16): stand D18

Fairground map

glasstec 2016 fairground map: Hall 16

Contact

Dr. Michela Pezza

Executive board/managing director
Business, corporate or plant management

Via Ing. V. Balduzzi 29
24023 Clusone, Italy

Phone
+39 034627841

Fax
+39 034627842

Email
michela@fratellipezza.com

Dr. Paolo De Borzatti

Department head/group leader
Marketing, sales, advertising, PR

Via Ing. V. Balduzzi 29
24023 Clusone, Italy

Phone
+39 034627841

Fax
+39 034627842

Email
paolo@fratellipezza.com

Our products

Product category: Matting/Supercalendering/etching/sand blasting technologies

SANDBLASTING MACHINES / MISTRAL SERIES

The MISTRAL EV series represents the top of Fratelli Pezza’s product range. It’s a solid and compact equipment very easily usable by every operator, which provides high productivity despite the very low electrical and compressed-air consumption. The MISTRAL EV offers several working options, included the shading and the zonal blasting. It’s possible to operate in automatic or manual mode and the maximum working height can be doubled being the cabin open topped. The machine is equipped with a high-efficiency filtration system with automatic separation of the waste dust from the abrasive material, which is therefore recovered and recycled. Thanks to special airtight rubber shelters placed on the side openings of the cabin, the dust is not allowed to flow out in the surrounding environment. All models are equipped with a revolutionary system that limits the accumulation of electrostatic charge inside the cabin. All components and parts subject to wear are made of highly abrasion-resistant materials, to ensure optimal performance and long life.

More Less

Product category: Matting/Supercalendering/etching/sand blasting technologies

SANDBLASTING MACHINES / ZEPHIR SERIES

The automatic series ZEPHIR represents an excellent compromise between quality and price. It’s a solid and compact equipment very easily usable by every operator, which provides high productivity despite the very low electrical and compressed-air consumption. The Zephir offers several working options, it’s possible to operate in automatic or manual mode and the maximum working height can be doubled being the cabin open topped. The machine is equipped with a high-efficiency filtration system with automatic separation of the waste dust from the abrasive material, which is therefore recovered and recycled. Thanks to special airtight rubber shelters placed on the side openings of the cabin, the dust is not allowed to flow out in the surrounding environment. All models are equipped with a revolutionary system that limits the accumulation of electrostatic charge inside the cabin. All components and parts subject to wear are made of highly abrasion-resistant materials, to ensure optimal performance and long life.

More Less

Product category: Matting/Supercalendering/etching/sand blasting technologies

SANDBLASTING MACHINES / GHIBLI SERIES

It’s a solid and compact equipment, very easily usable thanks to the foot-operated pedal, which provides a good productivity rate despite the very low electrical and compressed-air consumption. The machine is equipped with a high-efficiency filtration system with automatic separation of the waste dust from the abrasive material, which is therefore recovered and recycled. Thanks to special airtight rubber shelters placed on the side openings of the cabin, the dust is not allowed to flow out in the surrounding environment. All components and parts subject to wear are made of highly abrasion-resistant materials, to ensure optimal performance and long life.

More Less

Product category: Matting/Supercalendering/etching/sand blasting technologies

EASYMARKER UP: AUTOMATIC GLASS MARKING EQUIPMENT FOR HORIZONTAL PRODUCTION LINE

The sand-jet marking machines allow to carry out a permanent mark on the glass in a very cost-effective way and that’s why such technique is best performing and definitely preferable to laser and ink printing. Our automatic marking equipment EASYMARKER UP has been designed to be used in a horizontal production line and it’s suitable for serial production. The logo can be carried out in different positions thanks to the fact that the steel mask (in which the logo is engraved) can be rotated and the gun head can be adjusted by the operator in order to ensure the coupling with every horizontal glass working machinery available on the market (tempering lines, washing machines, etc.). The EASYMARKER UP is a marking device that allows to speed up the marking process providing high quality of engraving for a non-fading logo. The machine is also equipped with an integrated timer that allows to optimize the production time and preserves the steel mask from premature wear. The aspirator connected to the Easymarker UP, called FP101, is equipped with a built-in dust filter and a container for abrasive material.

More Less

Product category: Matting/Supercalendering/etching/sand blasting technologies

EASYMARKER EV: AUTOMATIC GLASS MARKING EQUIPMENT FOR VERTICAL PRODUCTION LINE

The sand-jet marking machines allow to carry out a permanent mark on the glass in a very cost-effective way and that’s why such technique is best performing and definitely preferable to laser and ink printing. Our automatic marking equipment EASYMARKER EV has been designed to be used in a vertical production line and it’s suitable for serial production. The logo can be carried out in different positions and at different heights, thanks to the fact that the steel mask (in which the logo is engraved) can be rotated and the position of the gun head can be adjusted by the operator. Moreover, the gun head is oscillating, in order to ensure the coupling with every vertical glass working machinery available on the market (bevellers, double edging machines, washing machines, tempering lines etc.). All these features enable to carry out the logo also on the edge of the glass. The EASYMARKER EV is a marking device that allows to speed up the marking process providing high quality of engraving for a non-fading logo. The machine is also equipped with an integrated timer that allows to optimize the production time and preserves the steel mask from premature wear. The aspirator connected to the Easymarker EV, called FP101, is equipped with a built-in dust filter and a container for abrasive material.

More Less

Product category: Matting/Supercalendering/etching/sand blasting technologies

MARKER 101T: PORTABLE GLASS MARKING EQUIPMENT

The sand-jet marking machines allow to carry out a permanent mark on the glass in a very cost-effective way and that’s why such technique is best performing and definitely preferable to laser and ink printing. The Marker 101T is a portable unit and this enables to carry out the marking operation on already installed glass panels. The unit is equipped with a built-in dust filter and an abrasive material container and the stencil with the logo, made of highly abrasion-resistant stainless steel, can be rotated so that the logo can be carried out in any position. The MARKER 101T is also equipped with a timer, that allows to optimize the production time and preserves the steel mask from premature wear.

More Less

Product category: Matting/Supercalendering/etching/sand blasting technologies

EASYMARKER: PERMANENT MARKS ON GLASS

The sand-jet marking machines allow to carry out a permanent mark on the glass in a very cost-effective way and that’s why such technique is best performing and definitely preferable to laser and ink printing. Our semi-automatic marking equipment EASYMARKER has been designed to be used in a production line and it’s suitable for serial production. The logo can be carried out in different positions and at different heights, thanks to the fact that the steel mask (in which the logo is engraved) can be rotated and the position of the gun head can be adjusted by the operator. Moreover, the gun head is oscillating, in order to ensure the coupling with every glass working machinery available on the market (bevellers, double edging machines, washing machines, tempering lines etc.). All these features enable to carry out the logo also on the edge of the glass. The EASYMARKER is a marking device that allows to speed up the marking process providing high quality of engraving for a non-fading logo. The machine is also equipped with a timer that allows to optimize the production time and preserves the steel mask from premature wear. The aspirator connected to the Easymarker, called FP101, is equipped with a built-in dust filter and a container for abrasive material.

More Less

Product category: Matting/Supercalendering/etching/sand blasting technologies

SANDER FP 101: PORTABLE SANDBLASTER

The portable sandblaster SANDER FP 101 is the most economical solution to manually blast small glass pieces. Solid and compact, the unit is equipped with a built-in filtration system with automatic recovery and recycling of the abrasive material. The gun’s circular brush prevents the abrasive material from leaking out. All components and parts subject to wear are made of highly abrasion-resistant materials, to ensure optimal performance and long life.

More Less

Product category: Matting/Supercalendering/etching/sand blasting technologies

ALUMINIUM OXIDE: THE ABRASIVE MATERIAL FOR YOUR SANDBLASTER

For a correct use of the sandblasting machine and in order to obtain an excellent sandblasting quality it’s absolutely necessary to use high-quality abrasive material. That’s why FRATELLI PEZZA keeps in stock for its customers selected extra quality material, which is available in several different grains. The material undergoes accurate chemical analysis so that its quality, hardness and high efficiency are guaranteed.
The use of high-quality aluminum oxide is indispensable to get the best performance out of the machine. As a matter of  fact there are a lot of products of poor quality on the market, whose performance is up to 3 or 4 times lower than that of the extra quality aluminium oxide supplied by Fratelli Pezza. Moreover, the low-quality materials produce an excessive amount of dust, putting the filtration system under stress.

More Less

Product category: Matting/Supercalendering/etching/sand blasting technologies

MIX 30: glass surface protector

MIX 30 is a liquid solution that protects the glass or mirror surface facilitating the cleaning operation, with particular regard to sandblasted glass. Quickly and easily applicable, MIX 30 protects the glass surface making it water repellent and resistant to dirt, stains, fingerprints, soap, detergent foam, rust, lime and mineral residues.
Mix 30 creates an invisible protective barrier extremely effective in the preservation of glasses and mirrors (sandblasted and not), and it is especially used for: Dividing walls, Shower cabins, Doors, Windows, Tables, Kitchen shelves, Bathroom furniture, Tiles, etc.
The product must be applied on clean, dry surface, following the instructions provided in the package. The MIX 30 shield may last, depending on the conditions, from a minimum of one year up to five years, and approximately 100 m2 of non treated transparent glass can be processed with a liter of product.

More Less

Company news

Date

Topic

Download

Sep 1, 2016

A leap into the future of glass marking

Fratelli Pezza Srl, a company which is always at the forefront in the production of sandblasting and marking systems for flat glass, is set to launch on the market two new products that will revolutionize the sector of glass marking, as the GLASSTEC exhibition (Düsseldorf, 20-23 September 2016) will be the scene of the world premiere of the automatic marking equipments EASYMARKER EV and EASYMARKER UP. The EASYMARKER EV is an evolution of the semi-automatic marking device EASYMARKER, launched on the market on occasion of Vitrum 2015. The latter, while representing an important milestone in the development of the production range of Fratelli Pezza, in fact, needed the presence of an operator in order to be actuated. On the other hand,  with EASYMARKER EV the operation can be performed in a completely automatic way, without the need for the constant presence of an operator. Like its predecessor, the EASYMARKER EV is designed for marking vertically positioned glass, basically on the backs of machinery such as washing machines or double glazing lines. The EASYMARKER UP is an absolute novelty, as it allows the marking, always in fully automatic mode, of horizontally positioned glass. The idea to design this version, developed by Fratelli Pezza R&D department after extensive studies and tests, responds to a widespread need among glassmakers. The opportunity provided by the new EASYMARKER range of engraving logos on glass in a quick, fully automatic and permanent way, represents an added value for the production of any glassworks.

More Less

Jun 20, 2016

A new equipment in the field of glass marking

EasyMarker, a brand new sand-jet semi-automatic marking equipment suitable for use in a production line Fratelli Pezza, global leader in the manufacture of sandblasting and marking equipments for flat glass, has recently brought to the market Easymarker, a sand-jet semi-automatic marking equipment suitable for use in a production line that provides a clear and permanent mark on the glass surface.

More Less

About us

Company details

FRATELLI PEZZA was founded in 1970 and started its activity as a manufacturer of industrial plants and machinery, shifting soon its focus towards the glass machinery sector. The company represents leading edge technology in the manufacture of sandblasting and marking equipment for flat glass, thanks to the creativity and technical skillfulness of its founder Alessandro Pezza, the person who actually invented the fully automatic sandblaster for flat glass. The enterprise constantly concentrates on R&D, looking for innovative solutions from both the technical and functional point of view. These efforts resulted in the newest version of the Mistral series, the Mistral EVOLUTION, and in the marking equipments EASYMARKER EV and EASYMARKER UP, that allow to mark the glass in both vertical and horizontal position in a fully automatic way. Fratelli Pezza, taking advantage of its recently renewed headquarters which allow the company to reach high efficiency levels, remains world’s leading manufacturer of sandblasting and marking equipments for flat glass and boasts prestigious references worldwide.

More Less

Company data

Export content

> 75%

Number of employees

5-10

Foundation

1970

Area of business

Glas processing and finishing

Target groups

Manufacturing, Processing and Finishing

Company information as a PDF file