Bohemia Machine s.r.o.

Zamecka 1177 , 582 91 Svetla nad Sazavou
Czech Republic

Telephone +420 569 453-149
Fax +420 569 456-265
info@bohemia-machine.cz

Trade fair hall

  • Hall 12 / B21
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 12): stand B21

Fairground map

glasstec 2016 fairground map: Hall 12

Our range of products

Product categories

  • 02  Glass processing and finishing
  • 02.03  Edge and surface finishing technology
  • 02.03.02  Grinding techniques for hollow glass/moulded glass
  • 02.03.02.01  Decorative grinding technology

Our products

Product category: Decorative grinding technology

BM JACK 1: Glass cutting automat

BM-Jack 1 is designed for decoration of glass articles

In fact, this machine brings a brand new innovation in glass cutting decoration. So far, the machine glass cutting has never been so close to the manual glass cutting decoration. The individual machine axes can move with servomotors. In total, there are seven servomotors mounted in the machine. The cutting wheel is driven with an asynchronous motor. An electric switchboard with all necessary electric components used to control the machine is a part of the machine too.
There is a touch-screen on the front side of the machine at which you can adjust some parameters necessary to tune up the cutting program. The cutting program uses a design software. You can get this software in the following way:

- Purchase from Horus
- File generation according to customer’s wishes - this is convenient in the case of repeated orders
- Upgrading of an older Horus or Wincut program
The design software generates a data file that is subsequently loaded in the machine PC (situated in the machine switchboard). The machine computer repeatedly controls the whole cutting process then.
When cutting with more machines, just one design software is sufficient. It generates the data files for individual machines, e.g. different patterns can be cut at each position. This automatic machine is economical for as small batch as 60 - 100 article pieces.
The data files can be loaded from the design software using the following way – network data transfer, flash disc, CD, DVD or wireless data transfer.

The whole machine space demand does not exceed that of a single glasscutter. The machine is equipped with a closed cooling water circuit and water consumption is about 1000 litres a month. After adjustment, even an unqualified person can operate the machine. However, adjustment of the machine and the program maintenance should be performed by a qualified person and our company is ready to provide the training for your personal.

More Less

Product category: Decorative grinding technology

BATCH HOUSE

Are you considering to build, reconstruct or modernise your batch plant, sand plant or weighing system? Our technicians, experienced in processing, treatment and handling of material prior its feeding in the furnace, are ready to design the best possible solution for your production requirements.
 

More Less

Product category: Decorative grinding technology

BM JACK3: 3 positions glass-cutting automat

Glass-cutting automatic machine BM-Jack is designed for decorating glassware.

As in the case of single-position machine, this machine is yet another revolutionary step in glass cutting. The machine is designed to cut three products at the same time. On request, we can mount three spindle-cutting heads, which will enable you to perform glassware decorating with different cutting tools in one single stage, without having to re-align the product.
Each individual machine cutting tool is driven by a servomotor. In total, there are eleven servomotors mounted in the machine. The cutting spindles are driven by asynchronous motors. Built into the machine is an electric circuit board with all the necessary components for controlling the machine. We can supply a transversal travel unit upon request. With this you can cut plane surfaces, such as decanters, plates or sheet glass. There is a touch-screen on the front side of the machine which allows you to adjust parameters necessary for tuning up the cutting program and to control manual movements and operations.

Design software is needed to run the cutting program, which can be obtained in one of the following ways:

- Purchasing from Horus.
- Generating a file according to the customer’s specifications. This will be particularly convenient in the case of regular repeat orders.
- Upgrading an older Horus or Wincut program.

The design software will generate a data file, which will be downloaded into the machine computer (situated in the machine circuit board). The machine computer will control repeated cycles of the whole cutting process. When cutting with a number of machines, only one design software is needed. It will generate data files for individual machines, i.e. different patterns can be cut by different machines.

The data files can be downloaded from the design software using one of the following ways – network data transfer, flash disc, CD, DVD or wireless data transfer.

The machine is equipped with a closed cooling water circuit and water consumption is about 1000 litres a month. Even an untrained operator can work the machine after adjustments have been made. However, adjustment of the machine and maintenance of the program has to be done by a qualified person, and Bohemia Machine s.r.o. is happy to provide the training for your personnel.

More Less

About us

Company details

BOHEMIA MACHINE, Company Limited, was founded in 1992. At first, the company oriented at the nascent private utility glass grinding and cutting plants and supplied them with its glass grinding and cutting machinery and equipment. After getting the initial experience and the market saturation, BOHEMIA MACHINE turned its attention to the transforming Czech glassworks. Throughout 1993, the company expanded very fast and due to its current available trade lines, it is able to process your order from the design to the all-inclusive turnkey products. At present the company aims mostly at complete lines for treatment, storage, transport and mixing of loose materials in various technological production premises. As far as the glass industry is concerned, the company aims preferably at preparation of glass batch and cullet management lines. With regards to the fact that each glassworks is unique, many orders are fulfilled as customized prototypes.

More Less

Company data

Target groups

Manufacturing, Processing and Finishing