Carl Zeiss Spectroscopy GmbH

Carl-Zeiss-Promenade 10 , 07745 Jena
Germany

Telephone +49 3641 642838
Fax +49 3641 642485
info.spectroscopy@zeiss.com

Trade fair hall

  • Hall 14 / G45
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 14): stand G45

Fairground map

glasstec 2016 fairground map: Hall 14

Our range of products

Product categories

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.04  Detectors for laminated glass

Our products

Product category: Detectors for laminated glass

MMS Family Monolithical compact

The MMS spectrometer family delivers compact, robust measurement instruments. The spectrometer is equipped with a high performance detector for portable, process and OEM applications. The unique design provides permanent calibration and thermal stability to guarantee accurate and reliable measurements simultaneously for UV and NIR. The absence of any moving parts guarantees long lifetime and high durability.

Components of the MMS family

Cross-section converter as optical input
Imaging grating
Diode array as opto-electronic output
Interfaces, processing software and support

More Less

Product category: Detectors for laminated glass

ARMOR with MCS 611 NIR

Increasing production output in the food industry demand high product quality and require 100 % traceability of all raw materials and other ingredients. Therefore, new measurement and analytical methods are needed, which guarantee uninterrupted product analysis in the manufacturing process. The aim is to achieve consistent product quality while ensuring the whole manufacturing process is fully documented.

The ZEISS ARMOR measurement probe in combination with the spectrometer system MCS 611 is used for incoming goods inspections, production preparation, product manufacture (mixing processes etc.) and final product inspection. This system, with NIR-technology, measures the quality of ingredients and parameters lsuch as, fat, protein, water, sugar and acid in real-time. It analyzes the material at the beginning of the production chain or during the preproduction stage – when it is still possible to exert a direct influence on the final quality.

Valuable accessory for MCS 611
Versatile applications due to wide wavelength range from 450 to 2150 nm
Flexible sample presentation at distances between 100 and 240 nm
Results unaffected by sample height variations
Serial internal referencing for reliable, precise and reproducible results
Suitable for humid, hot and dusty environments (Splash water and dust proof for online applications)
Stainless steel design for the food processing industry
Carefree long-term operation in various production environments such as blenders or conveyors
Simple and convenient lamp replacement without adjustment

More Less

Product category: Detectors for laminated glass

CORONA PLUS 45 NIR

CORONA PLUS 45 NIR is an industrial reflection and transmission measuring head for applications in the VIS/NIR range. The sensor unit is ideal for incoming goods inspection and moisture monitoring in the pharmaceutical and chemical sectors as well as in the food industry. The system can be used for ingredient measurements and todetermine the concentration and homogeneity of components during mixing procedures. With its integrated spectral sensor and micro computer, it is designed for online measurements in rough environments to assure the quality and control the processes.

Benefits

Wavelength range for measurements up to 2.2 μm
Polychromator measuring head featuring a 0° / 45° circular measuring geometry
Fast and reliable data transmission even under rough conditions
Increased resolution and sensitivity, shorter measuring times
Longer service life of the light sources in the NIR range
Low noise and outstanding linearity through the use of latest electronics
Less thermal build-up environments through reduced power consumption, leading to better stability

More Less

Product category: Detectors for laminated glass

CORONA PLUS REMOTE

Corona Plus Remote is a complete spectrometer system that monitors the production of architectural and automotive glass, plastics and coatings as well as solar cells. The robust and reliable system is designed for complex and fast measurements under industrial conditions. The robust and reliable system is designed for complex and fast measurements in quality and process monitoring under industrial conditions.

Benefits

Fast and reliable data transmission even under rough conditions
Increased resolution and sensitivity, shorter measuring times
Extended wavelength range up to 2.2 μm
Longer service life of the light sources in the NIR range
Available as a single or dual-beam system
Low noise and outstanding linearity through the use of the latest electronics
Less thermal build-up environments through reduced power consumption

More Less

Product category: Detectors for laminated glass

OPTOPLEX®

The OPTOPLEX® family of spectroscopy systems are solutions for inline measurements of thin film coatings produced on high throughput industrial production lines. The family consists of three separate systems designed for specific applications; these include hardware and software to measure coatings on glass panes, systems for Roll-to-Roll processes and general quality control proceeding coating steps to ensure a consistent product.

Benefits

High measurement speed
Coated areas > 5 m2
Accuracy matching of different positions, also after years of operating
Easy adaption to changing requirements
Real-time data access
Easy-to-read graphical modes
Automation layer integration via OPC, ProfiBus, Digital I/O and SQL database
Modular design to add measurement positions or extend the spectral
Self-calibration, self-triggering and synchronization
Optic placement inside or outside the vacuum
Setup and system training by ZEISS

More Less

About us

Company details

ZEISS is an international leader in the fields of optics and optoelectronics.
ZEISS has been contributing to technological progress for 170 years – with solutions for the semiconductor, automotive and mechanical engineering industries, biomedical research and medical technology, as well as eyeglass lenses, camera and cine lenses, binoculars and planetariums.

Leading technologies and innovative solutions
ZEISS develops and distributes semiconductor manufacturing equipment, measuring technology, microscopes, medical technology, eyeglass lenses, camera and cine lenses, binoculars and planetarium technology. ZEISS is present in over 40 countries around the globe with more than 30 production sites, over 50 sales and service locations and about 25 research and development facilities. Founded in 1846 in Jena, the company now has its headquarters in Oberkochen in southwest Germany. Carl Zeiss AG is fully owned by the Carl Zeiss Foundation (Carl-Zeiss-Stiftung).

More Less