Innovation@Trendcompass

VDV Lubricants NV

Steenkaaistraat 17 , 9200 Baasrode
Belgium

Telephone +32 52 203952
Fax +32 52 225160
info@vdv-lub.com

Trade fair hall

  • Hall 12 / A09
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 12): stand A09

Fairground map

glasstec 2016 fairground map: Hall 12

Visit us

Hall 12 / A09

20.09.2016

Topic

Download

all-day

The new way of lubricating your hot-end container glass process - Produce more, safer with less lubricants

21.09.2016

Topic

Download

all-day

The new way of lubricating your hot-end container glass process - Produce more, safer with less lubricants

22.09.2016

Topic

Download

all-day

The new way of lubricating your hot-end container glass process - Produce more, safer with less lubricants

23.09.2016

Topic

Download

all-day

The new way of lubricating your hot-end container glass process - Produce more, safer with less lubricants

Our products

Innovation@Trendcompass
Innovation@Trendcompass:
Innovative products for processing in the glazier trade

Product category: Lubricants and coolants

VDV Lubricants and Glassline®

VDV Lubricants and Glassline®  product range, are today the best partner for the worldwide hot-end container & tableware production industry.

Glass forming process is a key step in making glass and is mainly composed of several highly automated & costly machines, better known as IS machines or H-28 machines – all together equipment’s being run by people.

Glass people and their machines deserve to operate in clean & safe conditions, to finally allow them to meet high production levels in terms of quality & quantity.

Glassline® lubricants are chemicals & essential for the hot-end process – Use less and produce more – is our slogan !!!

Glassline®  lubricants guarantee you & your plant: a safe & clean environment for operators, performant lubrication at low concentration, no metal corrosion, stable & high production rate, access to the newest technologies such as automatic & clean swabbing operations

Welcome to the best of Glassline® = shear oil, scoop oil, delivery coating, mould pre-coat & swabbing compounds, conveyor lube

More Less

Product category: Lubricants and coolants

Glassline® IS Special 100 & 220 / IS machine pneumatic oil - central lubrication

I.S. bottle forming machines are running with pneumatic systems; these systems need to be lubricated correctly with a minimum maintenance frequency. Therefore, following properties of the lubricants need to be controlled: resistant to air humidity or water contamination, long life & performant lubrication & stable to oxidation.

For many years, Glassline® IS Specials oils have demonstrated top performances as:

-  Water/humidity stable: can absorb water/humidity from compressed air up to 10% of its original weight
-  High level of Extreme Pressure lubrication – see our results for the 4-ball Shell wear test
-  Neutral effect on metal – pass all corrosion tests
-  Wide temperature conditions
-  Viscosity index from 90 to 149
-  Extended injection time: up to double value of standard market oils, result up to 90min

More Less

Product category: Lubricants and coolants

Glassline® Synshear F / Shear lubricant

GLASSLINE® SYNSHEAR F is a 100% fully water miscible shearing fluid specifically designed for the glass manufacturing industries as a lubricant for shears in glass cutting. Extremely good metal wetting properties to provide excellent performance results in hot glass shear cutting. Can be used for shearing of opal and borosilicate glass or normal classic glass.

Does not contain mineral oils, silicones or animal fats.
Free of secondary amines, nitrite and chlororganic substances.
Non-temperature sensitive. Stable solution even at 1°C.
Contains a controlled biocide system and a good fungi resistant to extend the sump life of the shear liquid. Biodegradable with a unique soluble lubricating system.

BLENDING AND DILUTION

At a dilution of 700 up to 1.000 to 1, gives a very smooth cutting action, reduced shear wear and shear marks.

ADVANTAGES

-  Very good wetting of the shears
-  Can be mixed with drinking quality water
-  Best wear protection of the shears
-  Colourless, transparent solution for long service life
-  Stable pH
-  High dilution ratio and economic in use
-  Fully biodegradable
-  No residues on the shears
-  High resistance to bacteria
-  High solution stability
-  Excellent machine care
-  Good corrosion protection

More Less

Product category: Lubricants and coolants

Glassline® Scoop Lubricant I / Scoop - shot gun lubricant

GLASSLINE® SCOOP LUBRICANT I is a funnel & scoop spray lubricant manufactured from severely hydrotreated mineral oils producing a white lubricant meeting latest European Pharmacopoeia, as well as USP FDA 178.3620(a) and FDA 172.878 Mineral Oil Specifications covering lubricants with incidental food contact, essential when very strict demands of the food and drink or cosmetic and pharmaceutical industries are to be considered.

GLASSLINE® SCOOP LUBRICANT I is able to lubricate the delivery system without carbon deposit build up while reducing the coefficient of friction between the gob and scoops allowing a uniform gob speed and an improved loading to the blank without glass marking.

ADVANTAGES:

-  Extremely low toxicity lubricant with LD 50 > 15.000 mg/kg
-  Excellent wetting out for optimal shotgun performance
-  Provides uniform gob speed
-  No-carbon build up on equipment
-  Water-white liquid which reduces the possibility of glass marking
-  Improves loading

More Less

Product category: Lubricants and coolants

Glassline® DDL 899 / Delivery coating & lubricant

Glassline® DDL 899 is a two component graphitized epoxy cold cure coating used for the dry lubrication of delivery chutes which is painted onto the delivery equipment.

ADVANTAGES

-  Very long lasting, air curing lubricant
-  Low coefficient of friction
-  Consistent delivery speed
-  Self-levelling coating
-  Coating life up to 12 weeks

DRYING TIME

-  Coating at ambient temperature (25°C): approx. 6h
-  Coating at 60°C: approx. 2h

More Less

Product category: Lubricants and coolants

Glassline® Spraycoat / Blank Mould lubricants

Glassline Spraycoat is a high performance graphite based coating with multipurpose complex bonding agents covering a wide range of temperatures.
It produces a long lasting, bonded coating with excellent lubrication and release properties.
The propellant gas of the aerosol is non-flammable.

APPLICATION:
Precoat for blank moulds, finish rings, bottom plates, baffles, funnels and blow moulds.
Recommended for blow moulds where checking and/or raised glass definitions are problems.
Finish coating for hanger hinge pins, delivery and glass chute systems.
Protection of all the surfaces of neck ring.

ADVANTAGES
-Improves initial start up of the coated equipment.
-Avoids swabbing during start up.
-Improves gob loading, mould filling and glass distribution.
-Gives excellent appearance to the glass surface when used as coating on blow moulds.
-Avoids stick slip, fretting corrosion and supports heavy loads at high speeds.
-Can be used on all materials.

More Less

Product category: Lubricants and coolants

Glassline® BML xxx / Blank Mould lubricants

Glassline® blank mould lubricants are formulated with special graphite compounds having exceptional low ash content.
The type, mesh size and concentration of the various graphites used is optimized for excellent mold surface.

Transfer and buildup of graphite is minimized while high quality appearance is maintained over an extended period and down time to change dirty blanks is reduced.

Extended swabbing cycles and maintaining a clean product have been accomplished by the Glassline blank mould swabbing compounds with high production efficiency for specific types of jobs.

Glassline blank mould lubricants cover a variety of applications going from general purpose to specific applications such as high speed production, high quality cosmetic ware as well as graphite free compounds for opal ware.

More Less

Product category: Lubricants and coolants

Glassline® SwabMatic / Blank Mould Lubricants for swabbing robot (see Socabelec / Heye)

By using this technology, you will increase your hot-end productivity by minimum 3%.

Glassline® SwabMatic 180 has been designed to generate high level of swabbing performances by using an automatic spray system installed on cast iron moulds .  Such system requires frequent, stable & efficient swabbing cycles and maintains a clean product during automatic swabbing spray process.

Once automatic spray parameters defined, the system will work smoothly without shutdown interruptions. Transfer and build-up of carbon is minimized, therefore high quality appearance is maintained over an extended period and down time to change dirty blanks is reduced.

We also developed SwabMatic 180 NS which can be used on sulphur corrosion sensitive moulds (e.g. bronze).

Both SwabMatic 180 and  180 NS do not contain ingredients of animal origin, such as fatty acid from Lard Oil.

More Less

Product category: Lubricants and coolants

Glassline® SwabPharma / Clean & Safe Blank Mould lubricants

This innovative swabbing compound is generating a very performant mould lubrication and leaving glass well finished and clean.  Carbon deposits and emissions are reduced to a minimum and reaching levels much lower than traditional swabbing compounds.

Glassline® SwabPharma-I has been tested & approved on borosilicate pharmaceutical glass Type-I.

Oil mist produced after swabbing of heated mould is considerably reduced to avoid operator exposition to dangerous emissions.  Additionally, emissions such as PAH – Polycyclic Aromatic Hydrocarbons have been decreased by more than 80%.

Glassline® SwabPharma does not contain ingredients of animal origin, such as fatty acids from lard oil.

This new product has been tested & approved by SGD Pharma.

More Less

Product category: Lubricants and coolants

Glassline® Neck Ring xxx / Neck Ring Mould lubricants

Glassline neck ring lubricants are designed to be consistent and stable.

We do not recommend mixing blank mould lubricants with other oils.

Neck ring lubricants are in general lower in viscosity as the rings requires less lubrication. Using blank mould dopes or mixed products will result in build up of carbon between the guide plate and ring, as clearances are narrow.

Using specific neck ring lubricants will avoid distorted finish and sticking of guide rings.

Reducing oil viscosity can also lead to over-lubrication or splashing on the plunger.

Glassline neck ring lubricants are widely used over years in typical applications covering a wide variety of ware such as wine, beer, cosmetic and pharmaceutical ware.

More Less

Product category: Lubricants and coolants

Glassline® Release Agent / Finishing Mould lubricants

Glassline release agents are excellent clean anti-checking compounds widely used in the glass industry. To be used on hot glass contact areas of the various pieces of the mould equipment of the finishing moulds.
Formulated for application with a swab.

More Less

Product category: Lubricants and coolants

Glassline® Conveyor Lube/ Conveyor lubricants

Water based graphite dispersions formulated to give an insulation barrier and lubricant between the conveyor belt surface, star wheel, push out fingers and the hot bottles and/or jars.

Prevention of checks on the bottles/jars caused by conveyor belts, push out fingers, star wheels, cross conveyors and stackers. Conveyor Lube HC will help correct ware handling problems caused by ware "sticking" on dead plates, conveyors, etc. Insulation for blanks or moulds: Can be used to cause blanks or moulds to run hotter when applied to the outside surface.

Conveyor Lube HC will air-dry and can be applied with a swab or paintbrush on to the surface to be coated.

More Less

Company news

Date

Topic

Download

Sep 5, 2016

Glassline® DDL 899 / Dry Delivery coating & lubricant - up to 12 weeks in production

More Less

Sep 5, 2016

Glassline® SwabPharma / Blank Mould Lubricants without smoke

More Less

Sep 5, 2016

Glassline® SwabMatic / Blank Mould Lubricants for swabbing robot

More Less

About us

Company details

VDV Lubricants and Glassline®  product range, are today the best partner for the worldwide hot-end container & tableware production industry.

Glass forming process is a key step in making glass and is mainly composed of several highly automated & costly machines, better known as IS machines or H-28 machines – all together equipment’s being run by people.

Glass people and their machines deserve to operate in clean & safe conditions, to finally allow them to meet high production levels in terms of quality & quantity.

Glassline® lubricants are chemicals & essential for the hot-end process – Use less and produce more – is our slogan !!!

Glassline®  lubricants guarantee you & your plant: a safe & clean environment for operators, performant lubrication at low concentration, no metal corrosion, stable & high production rate, access to the newest technologies such as automatic & clean swabbing operations

Welcome to the best of Glassline® = shear oil, scoop oil, delivery coating, mould pre-coat & swabbing compounds, conveyor lube

More Less

Company data

Sales volume

0,5-1 Mio US $

Export content

> 75%

Foundation

1998

Area of business

Glas processing and finishing

Company information as a PDF file