Polpur spol. s.r.o.

Kudrnacova 1287 , 511 01 Turnov
Czech Republic

Telephone +420 481 311-581
Fax +420 481 313-581

Trade fair hall

  • Hall 12 / F24
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 12): stand F24

Fairground map

glasstec 2016 fairground map: Hall 12

Our range of products

Product categories

  • 02  Glass processing and finishing
  • 02.01  Cutting, breaking and snapping technology
  • 02.01.03  Devices for coating removal

Devices for coating removal

  • 02  Glass processing and finishing
  • 02.03  Edge and surface finishing technology
  • 02.03.05  Polishing technology

Polishing technology

  • 02  Glass processing and finishing
  • 02.11  Auxiliary products
  • 02.11.01  Tools
  • 03  Glass products and applications
  • 03.10  Technical processing, treatment, finishing design.
  • 03.10.03  Glass finishing
  •  Edge and surface finishing technology/grinding, engraving, printing
  •  Grinding, polishing and blasting materials

Grinding, polishing and blasting materials

  • 04  Tools, replacement and spare parts, aucillary equipment and fittings
  • 04.02  Cutting, grinding and drilling tools

Cutting, grinding and drilling tools

  • 06  Contracting, consulting, engineering, services

Contracting, consulting, engineering, services

Our products

Product category: Tools

PY 186 Tool


Great durability
High polishing efficiency
Designed for wet and dry polishing
Suitable for polishing on automatic production lines as well as for manual polishing
Polyurethane tool PY 186 is designed for polishing flat glass edges. The tool contains special abrasives which allow non-standard way of use (polishing in wet and dry conditions).

Typically used after diamond wheels (D64). 

More Less

Product category: Tools

LAPI Pink Wheel

The tools are made of polyurethane foam
The tools are cooled with water (no added abrasive necessary)
The tools minimize cracking layer in worked glass thereby polishing is easier
The tools are suitable for lathes (vertical way) as well as for flat machines (horizontal way)
The tools are easily profiled
We produce 6 types of LAPI Tools. The difference is in the grit of incorporated abrasives. Lapi Pink has the greatest material removal effect and creates the roughest surface on glass, whereas Lapi Blue has the smallest material removal effect and creates the finest surface on glass.

PINK is suitable for removing seams after moulding, for rough working within radii of various dimensions, etc.

VIOLET has the same use as Pink, however, it creates a finer surface with a slightly lower removal effect on glass than the Pink wheel.

ORANGE is suitable for various kinds of manual repairs prior and following chemical polishing as well as for fining before mechanical polishing.

GREEN is suitable for fine cutting after rough LAPI. The tool creates surfaces which can be polished mechanically.

BLACK can directly polish concave surfaces, wedge cuts, etc. It is well suited for manual repairs of sodium-potassium crystal.

BLUE achieves final surface quality comparable to surfaces after processing with the finest pumice. In many cases this tool can be used for the final polishing.

More Less

Product category: Tools

MH Tool

MH Tools (discs/wheels) are manufactured from specially treated porous polyurethane foam. The tools are used for the polishing and lapping of glass, natural stones, single crystal materials, etc. The MH Tool material has the same properties in all directions. Hence the tools can be used on vertical as well as horizontal machines. The tools are used in all cases where, up until now, traditional materials such as cork, poplar wood, felt, etc., have been used. When compared with traditional materials, MH Tools offer the following advantages:

Greater durability
Higher polishing productivity
Higher quality of polished articles
Higher reproducibility
Greatly improved work safety
Less physical effort.

More Less

Product category: Grinding, polishing and blasting materials

CEROX polishing powder

Universal types, suitable for soft and hard glasses

Optimal grit size – D50 1,0 – 2,0 μm

Types designed for polishing of optical glass and domestic glassware

Superious quality of polished surface

Recommended carriers: Polpurs tools (MH, MTV, NP, AB, CZ)

Very high durability of polishing slurry

More Less

About us

Company details

POLPUR is a wholly Czech firm which was founded in 1990. The company’s product range includes a wide offer of polishing, lapping and grinding tools used mainly in the glass and jewellery industries, as well as in the optical and machinery industries.
  POLPUR tools have been successfully used by Czech and Slovak glass companies for many years. Nevertheless, a substantial part of the firm’s production (about 75%) is exported to glass companies not only in Europe but also in Asia, America and Australia. When comparing POLPUR tools with traditional implements, our customers especially appreciate the advantage of POLPUR tools’ superior durability and productivity, as well as the higher quality and reproducibility of the finish achieved. For the operator our tools also mean a higher degree of work safety and less physical effort related to cleaner working conditions.

More Less

Company data

Target groups

Manufacturing, Processing and Finishing