Premium Exhibitor

Pannkoke Flachglastechnik GmbH

Händelweg 5 , 23556 Lübeck
Germany

Telephone +49 451 47008-0
Fax +49 451 47008-37
info@pannkoke.de

Trade fair hall

  • Hall 12 / A30
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 12): stand A30

Fairground map

glasstec 2016 fairground map: Hall 12

Our range of products

Product categories

  • 01  Glass production/Production Technology
  • 01.13  Conveying, transport, packing and warehouse technology
  • 01.13.02  Transport and handling systems

Transport and handling systems

  • 01  Glass production/Production Technology
  • 01.13  Conveying, transport, packing and warehouse technology
  • 01.13.08  Construction and glazing equipment

Construction and glazing equipment

  • 02  Glass processing and finishing
  • 02.01  Cutting, breaking and snapping technology
  • 02.01.01  Cutting technology
  • 02.01.01.01  Cutting technology for float glass
  • 02  Glass processing and finishing
  • 02.01  Cutting, breaking and snapping technology
  • 02.01.01  Cutting technology
  • 02.01.01.03  Cutting technology for technical glass
  • 02  Glass processing and finishing
  • 02.01  Cutting, breaking and snapping technology
  • 02.01.04  Snapping technology flat glass
  • 02.01.04.01  Mechanical snapping devices

Mechanical snapping devices

  • 04  Tools, replacement and spare parts, aucillary equipment and fittings
  • 04.02  Cutting, grinding and drilling tools

Cutting, grinding and drilling tools

  • 04  Tools, replacement and spare parts, aucillary equipment and fittings
  • 04.03  Handling tools, hand-guided

Handling tools, hand-guided

  • 04  Tools, replacement and spare parts, aucillary equipment and fittings
  • 04.05  Protection devices

Protection devices

Our products

Product category: Cutting technology for float glass, Cutting technology for technical glass

Manual Glass Cutting Machine 100-5d

The cutting machine 100-5d has an electrically positionable cutting head that can execute longitudinal or transverse cuts, as required.The transverse cuts are performed by a hand crank drive, while the longitudinal cuts are performed by manually pushing the cutting bridge.

For determining the exact position, the cutting machine 100-5d has two digital measuring displays for the position of the cutting head and of the cutting bridge. You can choose between cutting with absolute dimensions referenced to the glass zero point or cutting with incremental dimensions that are always referred to the last cut.

More Less

Product category: Cutting technology for float glass, Cutting technology for technical glass

Air cushion tilting table 435G - glass cutting machine 100-5d

The 435G/100-5d is the economical solution for cutting flat glass in the glass processing company. Float and figured glass sizes up to 2200 x 3210 mm can be cut manually with this cutting table. The manual tilt movement of the table top is supported by gas pressure springs. The digital measuring system prevents reading mistakes and offers a high reproducibility and permanence of dimension in comparison to cutting with glass cutter and ruler. The air cushion enables the easy movement of glass sheets up to 8 mm thickness. The cutting table 435G is also available without the cutting machine. The cutting machine 100-5d can be installed easily on any other Pannkoke cutting table.

More Less

Product category: Cutting technology for float glass, Cutting technology for technical glass

CNC-Cutting Machine Prince 3M

The Cutting Machine PRINCE 3M cuts flat glass from 2 to 19 mm and is produced for glass sizes up to 6000 x 3250 mm.

This low-noise cutting machine cuts rectangular and model cuts with an outstanding repetition accuracy.

Depending on the selected glass type, the values for cutting speed and cutting pressure are of course set automatically. Cutting plans from the cutting optimisation system can be taken over without problems. A cutting optimisation can also be performed directly at the cutting table.

This robust machine is designed for continuous use. All purchased parts are high quality components from well-known manufacturers which assures long range availability.

Cutting machines from the eighties are still in use world-wide. This same target has been consistently kept for the new generation NC-controlled cutting machines.

More Less

Product category: Cutting technology for float glass, Cutting technology for technical glass

Loading table 4620

For the economical cutting of flat glass with sizes up to 6000 x 3210 mm, a quick and reliable loading system is needed in addition to a corresponding cutting machine. Our loading and cutting table 4620 is perfect for these requirements. It is produced in manual to fully-automated editions and can be adapted to nearly every problem definition.

Furthermore, you have the option of equipping this type with each Pannkoke cutting machine. Float and figured glass as well as laminated safety glass can be done efficiently with this loading and cutting table.Combined with a break-out table you have a space saving cutting line which enables you, with a loading system such as our bay-carriage rack system, to automatically load up to eight glass types.

More Less

Product category: Cutting technology for float glass, Cutting technology for technical glass

Air cushion tilting table 490P

The air cushion tilting table 490P/LFB is designed for the manual cutting of glass sizes up to 2600 x 4600 mm and a maximum glass thickness of 8 mm.

This universal cutting, tilt and break-out table enables the rational and safe movement of all glass dimensions up to the maximum size from the vertical (storage position) to the horizontal (working position). This tilt movement works pneumatically. An air floatation cushion on the cutting, tilt and break-out table assures easy movement of the glass sheet in the horizontal position.

All manual Pannkoke cutting machines can be combined with this air cushion tilting table 490P/LFB. This enables you to configure the optimum universal cutting, tilting  and break-out table for your requirements.

The built-in pneumatic break-out bars enable a neat break-out of the executed cuts. The operation of the break-out bars works via the knee of the operator so that both hands free for guiding the glass sheet.

This cutting, tilt and break-out table 490P/LFB/115-5 is the economical solution for small and mid-sized factories.

More Less

About us

Company details

We, Pannkoke Flachglastechnik GmbH, are a specialist company that manufactures equipment, machines and tools for the glass processing industry. Our mid-sized enterprise was founded in 1900. 

Since 1958, we have been developing and producing practical vacuum lifting devices and flat glass cutting machines.

Due to our many years of experience we have also distinguished ourselves as a leader in fulfilling extraordinary customer wishes and requirements in respect to vacuum lifting device needs. Individual customized solutions are our strong point as many of our customers can confirm.

Quality and service come first. During production, special importance is placed on assuring the long, useful life of the devices and machines. When selecting suppliers we insist on high quality and long-term availability.

The oldest vacuum lifting devices that we maintain yearly and which are still in full operation originate from the year 1965.

Some of our cutting machines are still in use world-wide even after decades of full production, kept in working order by us. Our customers, who have been using our products for decades, can testify to their quality.

More Less

Company data

Sales volume

1-2,5 Mio US $

Export content

max. 75%

Number of employees

11-30

Foundation

1900

Area of business

Tools, replacement and spare parts, auxilliary equipment and fittings

Target groups
  • Mechanical Engineering
  • Manufacturing, Processing and Finishing
  • Crafts
  • Windows and Facades
  • Solar Glass/Technical Glass