Premium Exhibitor

Adelio Lattuada Srl

Via Abbondanza, 11/13 , 22070 Carbonate (CO)
Italy

Telephone +39 0331 832713
Fax +39 0331 833886
info@adeliolattuada.com

Trade fair hall

  • Hall 16 / D40
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 16): stand D40

Fairground map

glasstec 2016 fairground map: Hall 16

Our range of products

Product categories

  • 02  Glass processing and finishing
  • 02.02  Drilling technology
  • 02  Glass processing and finishing
  • 02.03  Edge and surface finishing technology
  • 02.03.01  Grinding techniques for flat glass
  • 02.03.01.01  Grinding techniques for straight edges
  • 02  Glass processing and finishing
  • 02.03  Edge and surface finishing technology
  • 02.03.05  Polishing technology
  • 02  Glass processing and finishing
  • 02.10  Cleaning technology
  • 02.10.01  Washing machines and equipment

Our products

Product category: Drilling technology

TP 1000.2H - Manual drilling machine

Manual drilling machine with two opposing heads, automatic lower head and manual upper head, with a useful depth of 1.000 mm. Available also in the automatic version.

Some features:

automatic clamping of the glass during the drilling cycle;
possibility to adjust the drilling depth on the lower head;
manual adjustment of the diamond tool speed by means of belts.

More Less

Product category: Drilling technology

TP 1065 - Semi-automatic drilling machine

Semi-automatic drilling machine with opposing heads (automatic lower head and manual upper head), particularly recommended for large productions and with a throating depth of 1.065 mm. Available also in the automatic version.

Some features:

automatic adjustment of the diamond tool speed by setting the drilling diameter;
automatic clamping of the glass during the drilling cycle;
possibility to adjust the drilling depth on the lower head;
automatic expulsion of glass cores.

More Less

Product category: Grinding techniques for straight edges

TLS 13 AV C H85 SP100 - Edging machine with variable angle

Electronic straight-line edging machine for the processing of flat edge with arris and with variable angle from 0 up to 45°, polished by liquid cerium oxide.

It can operate on glasses with a thickness up to 100 mm.
Thanks to important researches and studies we are able - on demand - to adapt its structure so that it can carry a maximum weight of 1.500 Kg instead of the previous 1.100 Kg. Thanks to read outs placed on the control panel it is possible to set adjustments as glass thickness, working speed, miter inclination and edge thickness. The conveyors slide on guides of hardened and rectified steel. In order to avoid the guides wear and tear, an automatic centralized lubrication system is fitted. The conveyor is composed by pads, made of a special material, which are mounted on precision chains. Mechanic glass clamping system. The polishing wheels intervention is automatic because it is controlled by a PLC. The arris wheels automatically adjust with the change of the glass sheet thickness. Adjustable inlet conveyor with which it is possible to adjust the glass removal up to 5 mm. Low voltage control panel (24V). All the electrical components are in accordance with CE and international standards.

More Less

Product category: Grinding techniques for straight edges

Corners grinding machines, DELTA Series

Automatic corners grinding machine for the processing of radium and straight corners perfectly polished in a single passage with flat edge with arris, pencil edge and other profiles (according to the wheels that are fitted on).

Pneumatic movement of wheel-holder groups. A peculiar advantage of this machine is the possibility to carry out the processing with continuous cycle having the chance to time the end stroke break from 0 to 30”. Moreover it is possible to process some kind of corners directly without the cutting.
Models available:

The DELTA M3 fits 4 spindles in total: 2 spindles for diamond wheels, 1 spindle for polishing wheel.
Time per cycle: from a minimum of 20” for thicknesses of 4/5/6 mm up to 2’ for larger thicknesses.

The DELTA M4 fits 4 spindles in total: 2 spindles for diamond wheels and 2 spindle for polishing wheels.
Time per cycle: from a minimum of 25” for thicknesses of 4/5/6 mm up to 2’ for larger thicknesses.

The DELTA M4 C fits 4 spindles in total: 2 spindles for diamond wheels and 1 spindle for polishing wheel and 1 spindle for felt wheel (with liquid cerium oxide).
Time per cycle: from a minimum of 25” for thicknesses of 4/5/6 mm up to 2’ for larger thicknesses.

The DELTA M5 fits 4 spindles in total: 2 spindles for diamond wheels and 3 spindle for polishing wheels.
Time per cycle: from a minimum of 25” for thicknesses of 4/5/6 mm up to 2’ for larger thicknesses.

More Less

Product category: Grinding techniques for straight edges

TL 10 C - Electronic straight-line edging machine

Electronic straight-line edging machine for the processing of flat edge with arris, polished by liquid cerium oxide.

Thanks to read outs placed on the control panel it is possible to set adjustments as working speed and glass thickness. Mechanic glass clamping system. In order to avoid the wheels wear and tear, a centralized lubrication system is fitted. The conveyor is composed by pads, made of a special material, which are mounted on precision chains. Automatic regulation of the arris wheels when the glass thickness change. The wheels are fitted on spindles to which the movement is transmitted thanks to toothed belts linked to the engines. The polishing wheels intervention is automatic because it is controlled by a electronic PLC. Adjustable inlet conveyor with which it is possible to adjust the glass removal up to 5 mm. Low voltage control panel (24V). All the electrical components are in accordance with CE and international standards.

More Less

Product category: Grinding techniques for straight edges

TLR 11 AV - Edging machine with variable angle

Electronic straight-line edging machine with variable angle from 0 up to 45°, polished by cerium impregnated wheel.

Thanks to read outs placed on the control panel it is possible to set adjustments as glass thickness, working speed, miter inclination and edge thickness. Mechanic glass clamping system. In order to avoid the wheels wear and tear, a centralized lubrication system is fitted. The conveyor is composed by pads, made of a special material, which are mounted on precision chains. Automatic regulation of the arris wheels when the glass thickness change. The wheels are fitted on spindles to which the movement is transmitted thanks to toothed belts linked to the engines. The polishing wheels intervention is automatic because it is controlled by a PLC. Adjustable inlet conveyor with which it is possible to adjust the glass removal up to 5 mm. Low voltage control panel (24V). All the electrical components are in accordance with CE and international standards.

More Less

Product category: Grinding techniques for straight edges

BETA 10 - Double-edger

Double-edger for the processing of the flat edge with arris with 10 cup wheels and possibility to add one dubbing device or a cerium wheel on each side.

Equipped with an automatic system of glass squaring and centring, it also has a colour touch-screen panel, conceived in order to help the machine's check, use and maintenance. Thanks to this panel, the operator can manage the (automatic/manual) cycle of the processing’s preparation, execution and monitoring with a series of very useful functions such as for instance the recording of the most frequent processing, the real-time statistics of use, the maintenance and alarms management. At the entrance side of the machine there are two steerable panels on which we have placed the ammeters for the wheels’ power absorption as well as other controls which can be helpful during the glass insertion phase. The rugged and strong bedplate of the machine is realized in arc-welded steel, duly nerved in order to avoid torsion effects of the structure. The movement transmission system is realized through a broached and toughened transmission bar, placed in a superior position with regard to the belts for guaranteeing: a better precision and durability of the bar and both the synchronism and the easy substitution of the belts. The main strong points of our double edger are the modern technologies used, the high-quality components for the electronics, the sensoristics and the automation and therefore the simple and quick setting and positioning. For this reason it is particularly suitable also for small production lots.

More Less

Product category: Polishing technology

GAMMA 8 - Bevelling machine

Automatic straight-line bevelling machine for the processing of the bevel polished by liquid cerium oxide.

Available both with electronic system and PC.
This machine, conceived in order to satisfy the medium productions, is equipped with all the devices that are necessary to simplify its use and maintenance. Thanks to read outs placed on the control panel it is possible to set adjustments as bevel inclination and edge thickness in order to process the desired bevel. The wheels are fitted on spindles in order to allow an homogeneity of rotation and to avoid the vibrations; the movement is transmitted thanks to toothed belts linked to the engines. The mechanical seal, an essential element of the spindle, is obtained thanks to the application of diaphragms. The conveyor is composed by pads, made of a special material, which are mounted on precision chains.

More Less

Product category: Polishing technology

GAMMA 643 - Straight-line bevelling machine

Straight-line bevelling machine for the processing of the bevel polished by liquid cerium oxide and and flat edge with arris grinding.

Available both with electronic system and PC.
High performance and simple use machine, in the PC version, the PC provides for the check and the setting of all the working phases:

wheels absorption
wheels wear
total and partial carried out production
adjustment of the conveyor
automatic setting for the processing of the small pieces
automatic management of the data regarding the bevel width and inclination, the edge thickness and the working speed
memorization of the data for the processing of standard bevels
visualization of the glass sheet position during the processing
memorization of the double and triple bevel

More Less

Product category: Washing machines and equipment

CT 3300/500/6S - Closed on top vertical washing machine

Closed on top vertical washing and drying machine for glasses with a thickness from 3 up to 25 mm and with minimum dimensions of 400 mm.

Body of the machine and all the parts in contact with the water are made of stainless steel while an anti-corrosion covering is granted by the use of epoxy and polyurethane paints. The machine is equipped in total with six brushes which can also be available in the special version for low-e coated glasses. Hot water can also be required. The drying is done by a couple of blowers powered by a high-pressure soundproof ventilator. The inlet and outlet conveyors are motorized like the glass thickness adjustment by guaranteeing this way a better washing quality on every thickness. On the outlet conveyor it is possible to apply a black panel with inspection lamps.
All our washing machines can be integrated with vertical CNC machines as well as included in our edging and bevelling lines, also thanks to the possibility to have the work surface at the same height. On request it is possible to manage thickness and speed adjustment ‘in-line’.

More Less

Product category: Washing machines and equipment

OT 2000/500/4S - Open on top vertical washing machine

Open top vertical washing and drying machine for glasses with a thickness from 3 up to 20 mm and with minimum dimensions of 350 mm.

Body of the machine and all the parts in contact with the water are made of stainless steel while an anti-corrosion covering is granted by the use of epoxy and polyurethane paints. The machine is equipped in total with four brushes which can also be available in the special version for low-e coated glasses. Hot water can also be required. The drying is done by a couple of blowers powered by a high-pressure soundproof ventilator. The inlet and outlet conveyors are motorized like the glass thickness adjustment by guaranteeing this way a better washing quality on every thickness. On the outlet conveyor it is possible to apply a black panel with inspection lamps.
All our washing machines can be integrated with vertical CNC machines as well as included in our edging and bevelling lines, also thanks to the possibility to have the work surface at the same height. On request it is possible to manage thickness and speed adjustment ‘in-line’.

More Less

Product category: Washing machines and equipment

OT 300: small washer fitted on the outlet conveyor of grinding and bevelling machines

During the storage of the glass it can happen to incur the risk of causing scratches on the glass sheets because of the dirt settled during the processing. This problem can be solved thanks to the use of our OT 300 that fitted on the outlet conveyor of grinding and bevelling machines allows a complete cleaning and drying of the processed edges of the glass sheets.
The OT 300 is also available in a motorized version, able to automatically position itself according to the glass thickness set on the machine. Equipped with two brushes, it is possible to request the version for the washing of low-e coated glasses. Always on demand, the hot water option can also be chosen.

More Less

About us

Company details

The company, founded at Carbonate (Como) in 1978, first attended, above all, to technical assistance services. At the beginning of the eighties, it started to manufacture automatic corners grinding machines and later straight-line edging machines (in 1983) and bevelling machines (since 1989).

From the establishment up to now the development has been uninterruptedly if you think that in 1979 Adelio Lattuada worked alone while and his staff is now composed of 35 persons planning, mounting and testing the machines. 

Our current machines range includes:

· more than 30 models of electronic or with PC straight-line edging machines for the flat edge with arris and with variable angle from 5 to 16 wheels

· complete line of double-edgers from 8 to 11 wheels on each side, for the flat edge with arris

· more than 10 models of electronic or with PC straight-line bevelling machines from 7 to 14 wheels

· 2 models of combined straight-line edging/bevelling machines (electronic or with PC) for the simultaneous processing of flat edge with arris and bevel in one single passage

· 4 models of automatic corners grinding machines

· 10 models of vertical washing machines

· 7 models of horizontal drilling machines

· accessories (small  washing machines to be fitted on the outlet conveyor of edging and bevelling  machines, device for the processing of parallelogram-shaped glasses in an inclined position).

More Less

Company data

Sales volume

2,5-5 Mio US $

Export content

> 75%

Number of employees

31-100

Foundation

1978

Area of business

Glas processing and finishing

Target groups

Manufacturing, Processing and Finishing