Emhart Glass S.A.

Postfach 22 51 , 6330 Cham 2
Hinterbergstr. 22 , 6330 Cham 2
Switzerland

Telephone +41 41 7494200
Fax +41 41 7494271
webmaster@emhartglass.com

Trade fair hall

  • Hall 13 / D33
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 13): stand D33

Fairground map

glasstec 2016 fairground map: Hall 13

Our range of products

Product categories

  • 01  Glass production/Production Technology
  • 01.06  Forming for hollow glass
  • 01.06.01  Gob feeder

Gob feeder

  • 01  Glass production/Production Technology
  • 01.06  Forming for hollow glass
  • 01.06.05  Shear blades

Shear blades

  • 01  Glass production/Production Technology
  • 01.06  Forming for hollow glass
  • 01.06.06  Blowing machines
  • 01  Glass production/Production Technology
  • 01.06  Forming for hollow glass
  • 01.06.07  Press machines

Press machines

  • 01  Glass production/Production Technology
  • 01.06  Forming for hollow glass
  • 01.06.08  Press-blow-machines

Press-blow-machines

  • 01  Glass production/Production Technology
  • 01.06  Forming for hollow glass
  • 01.06.12  Bottle and glass container machines

Bottle and glass container machines

  • 01  Glass production/Production Technology
  • 01.06  Forming for hollow glass
  • 01.06.15  Dosing systems

Dosing systems

  • 01  Glass production/Production Technology
  • 01.06  Forming for hollow glass
  • 01.06.16  Glass mould spray systems

Glass mould spray systems

  • 01  Glass production/Production Technology
  • 01.06  Forming for hollow glass
  • 01.06.18  Aids for the forming of hollow glass

Aids for the forming of hollow glass

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.01  Measurement and control
  • 05.01.01.04  Measurement and control of glass thickness

Measurement and control of glass thickness

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.01  Measurement and control
  • 05.01.01.05  Measurement and control of glass temperature

Measurement and control of glass temperature

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.01  Measurement and control
  • 05.01.01.06  Measurement and control of glass tension

Measurement and control of glass tension

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.01  Measurement and control
  • 05.01.01.07  Measurement and control of glass colour

Measurement and control of glass colour

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.02  Inspection technology
  • 05.01.02.01  Inspection of surface, contour and imperfection

Inspection of surface, contour and imperfection

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.05  Control and automation technology

Control and automation technology

  • 06  Contracting, consulting, engineering, services

Contracting, consulting, engineering, services

Our products

Product category: Blowing machines

IS 5"

The oldest and most traditional machine on the market today. The IS Machine is based on the original invention from the 1920's, and has undergone continuous development and improvement over the last 90 years. This "small" section 5" DG machine type is available in single, double, and triple gob configurations.
 

More Less

Product category: Blowing machines

BIS

There is a huge potential for the BIS to become a future industry standard, replacing the pneumatic IS machine types 4¼, 5” and 5½. One BIS machine has a ware range which covers almost the complete ware range of all the pneumatic machines. Existing molds, using specific adaptations, can continue to be used which results in a low transition cost. The first two 12 Section 140 mm (5½) BIS machines have been build and are ready to go under glass to prove the features and outperform the pneumatic IS machines.

More Less

Product category: Blowing machines

NIS- Ultimate servo-electric forming solution

Standard Features

- FlexIS TS Control System
- Servo Electric Gob Distributor
- Constant Cone delivery system
- Pneumatic Control Module PCM
- Blank Side with FPS Valve Technology
- Quick Change Plunger Mechanism
- VertiFlow Blank Mold Cooling RH/LH
- VertiFlow Blow Mold Cooling
- Neck Ring Cooling RH/LH
- High/Low Dead Plate Cooling
- Pocket Air Fingers
- Conveyor with Silent Chain
- Automatic Lubrication System with 4 zones
- Vacuum Assist Blow Side
- Machine Control Unit MCU

More Less

Product category: Blowing machines

AIS 6 1/4 - Advanced Pneumatic Glass Container Forming

Container Quality
 The unique parallel Mold Open and Close mechanism MOC enables more balanced cooling, improves mold equipment alignment and permits equal parison reheat. User experience shows mold wear can be reduced by up to 30%, resulting in better containers at lower cost.
Productivity
 The combination of an improved pneumatic system, highly efficient VertiFlow cooling, and parallel MOC motion ensures stable operation at higher cavity rates.
Flexibility
Market demand for containers is often unpredictable. To cope with changing requirements, the AIS machine can be converted between 6 1/4 DG and 4 1/4 TG within less than a shift. The AIS machine provides the most cost-effective way to benefit from familiar technology, with the option of Servo Electric Take Out and Invert mechanisms.

More Less

Product category: Aids for the forming of hollow glass

IS 4 1/4

The oldest and most traditional machine on the market today. The IS Machine is based on the original invention from the 1920's, and has undergone continuous development and improvement over the last 90 years. This "small" section 4 1/4 DG machine type is available in single, double, and on special request in triple gob configurations.

More Less

About us

Company details

Emhart Glass overview

Emhart Glass is the world's leading international supplier of equipment, controls and parts to glass container industry. With broad-based expertise in glass container forming, glass conditioning, gob forming, ware handling, cold end inspection, refractory parts and quality assurance, the company's machines and systems are established as standard products worldwide.

Emhart Glass also provides installation, training, production assistance, and maintenance related services.

Machine Overview:

IS 4 ¼”: SG, 4 ¼” DG, 3” TG
IS 5”: SG, 5” DG, 85 mm TG
IS 5 ½”: SG, 5 ½” DG
IS 6 ¼”: SG, 6 1/4” DG, 4 ¼” TG
AIS 6 1/4”: 6 ¼” DG, 4 ¼” TG
NIS 5”: 5” TG, 95mm QG, 6 ¼” DG
BIS 140mm DG, 95mm TG (70mm QG)

Inspection Systems.

Emhart Glass provides quality assurance solutions designed to meet almost any inspection requirement. The Emhart Glass "total choice" portfolio includes the new FleXinspect product family as well as high-precision on-line statistical sampling systems and a range of successful vision inspection machines that complement the FleXinspect and Veritas products."

Vision
Our vision is a world with glass as a dominant and preferred ecological material, enabled by Emhart Glass as the leading technology provider.
Mission
We support our customers in their quest for sustainable profitability, quality and increased market share in the packaging industry through our automation solutions.
Guiding Principles
Emhart Glass fosters an environment for personal development. Every employee's contribution is vital to the growth of our business.
We provide our customers with solutions that exceed their expectations. We anticipate their future needs.
We will maintain our leading

More Less

Company data

Sales volume

> 100 Mio US $

Export content

> 75%

Number of employees

> 500

Foundation

1912

Area of business
  • Glass manufacture / Production technology
  • Tools, replacement and spare parts, auxilliary equipment and fittings
Target groups

Mechanical Engineering