Panini S.r.l.

Via Taruffi, 70 , 41053 Maranello (MO)
Italy

Telephone +39 0536 940707
Fax +39 0536 943705
info@op-panini.it

Trade fair hall

  • Hall 11 / F65
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 11): stand F65

Fairground map

glasstec 2016 fairground map: Hall 11

Our range of products

Product categories

Our products

Product category: Autoclaves

Autoclaves for composites

Most of the projects have been realized on turn-key basis.
The combined effect of temperature pressure and vacuum carried out during cycle fases of the auto¬clave gives the best polimerization and resistance to the product under treatment.
Panini scope of work includes the following:

• air compressor
• air compressed tank
• connecting platform
• evaporative towers
• vacuum system
• vacuum lines
• piping insulation
• erection-commissioning and training.

Each Panini autoclave is custom designed to the customer’s requirements, with special attention paid to the heating gradient and temperature uniformity.

General characteristics:

INTERNAL DIMENSIONS:
·DIAMETER: FROM 1000 TO 4200 MM AND ABOVE ON REQUEST
·LENGTH: FROM 1000 TO 50.000 MM

WORKING PRESSURE:
·FROM 0,5 TO 10 BAR AND OVER ON REQUEST

WORKING TEMPERATURE:
·UP TO 250°C AND OVER ON REQUEST

THERMAL GRADIENT:
·FROM 0,5 TO 10°C AND OVER ON REQUEST

More Less

Product category: Autoclaves

Autoclave for laminated glass

Panini manufactures autoclaves optimized for lam-inating of tempered or hardened glass in flat or curved formats. The specific process for PVB (polyvi¬nyl butyral) ensures perfect bonding and transparen¬cy, without air bubbles or opacity.

Panini’s thermodynamic process focuses on maximiz-ing the production of glass while minimizing utilities inputs. Generally, the autoclave and trolley are sized to maximize capacity of the customer’s main product format.

General characteristics:

INTERNAL DIMENSIONS:
·DIAMETER: FROM 1600 TO 4200 MM AND ABOVE ON REQUEST
·LENGTH: FROM 3000 TO 8.000 MM

While the characteristics of the piece and pro¬cess vary, some standard glass sizes are:
·Da 1200×2500 mm
·Da 1200×2500 mm
·Da 1700×3000 mm
·Da 2000x 3500 mm
·Da 2200×3500 mm
·Da 2600×4000/4500/5000/5500 mm
·Da 2800x 5000/6000/7000 mm
·Da 3200×6000/7000 mm
·Da 3300×6000/7000/8000 mm

MAX WORKING PRESSURE:
·15 bar

MAX WORKING TEMPERATURE:
·150°C
THERMAL GRADIENT:
·Up to TO 1°C AND OVER ON REQUEST

More Less

Product category: Autoclaves

AUTOCLAVE FOR RUBBER VULCANIZATION

General characteristics:

The types of heating provided are the following:
·direct steam from generator
·indirect steam from generator
·mixes air / steam from the generator
·forced air recirculation, heated up by electric, gas or indirect steam.

Useful dimensions obtainable are the following:
·Diameter from 1.000 to 4.000 and over
·Length from 1.500 up to 40.000 length and over

The operating cycles may provide for systems of cooling obtained with well water and or by means of cooling systems such as cooling towers open circuit or cooling chillers.
The autoclaves are manufactured according to the most efficient technologies to ensure durabil¬ity and maximize energy savings.
Details and dedicated project estimates are pro¬vided in order to ensure maximum durability pro¬viding thickness of the autoclave coat adjusted to take account of corrosion when is expected the use of direct steam. Special attention is re¬served to the maximum safety of functioning and easy use.

More Less

Product category: Autoclaves

AUTOCLAVE FOR IMPREGNATION

Panini autoclaves are designed and built to achieve the perfect vacuum impregnation. It is a production process required in prevalence in mechanical, electrical, for the treatment of wood for external, foundries, marble, bricks aerated for the building etc. The treatment allows to the com¬ponents, for various solutions applied, to obtain maximum strength and insulation with long life.
In the mechanical field and for foundries activity the impregnation ensures the isolation of the po¬rosity avoiding any stagnation. In the marble field, granite the application allow to reach the best conditions of impregnation by providing the quali¬ty standards required from the market.
The standard dimensional characteristics and operating parameters foreseen for these solu¬tions are the following:
• Diameter from 1.000 up to 2.600 mm. and over
• Length from 2.000 up to 50.000 mm. and over
Working temperature up to 200°C and over
Working pressure from 1 to 20 bar and over.

More Less

Product category: Autoclaves

AUTOCLAVE FOR AREATED CONCRETE

The process fluid is normally direct steam, but other methods are available for impregnating mar¬ble or its derivatives, in accordance with custom¬er-specific technical requirements.
The lightness and porosity of the bricks, coupled with the autoclave treatment, yields a highly effi¬cient insulator, which opens up interesting applica¬tions for energy efficiency.

More Less