FC SRL

Via Santi 154 , 41032 Cavezzo (MO)
Italy

Telephone +39 0535 490-35
Fax +39 0535 490-34
fcsrl@fcsrl.com

Trade fair hall

  • Hall 9 / D08
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 9): stand D08

Fairground map

glasstec 2016 fairground map: Hall 9

Our range of products

Product categories

  • 02  Glass processing and finishing
  • 02.03  Edge and surface finishing technology
  • 02.03.03  Matting/Supercalendering/etching/sand blasting technologies

Our products

Product category: Matting/Supercalendering/etching/sand blasting technologies

Pressure Cabin

TECHNICAL SPECIFICATIONS:: ◾Recycle abrasive;
◾Automatic clean of the filters;
◾Quantity air consumed: 800 Liters/minute at 5 BAR;
◾Potenza illuminazione: 220 V monofase-1,2 KW

MACHINE WORKING SIZE:: ◾Height: cm 100;
◾Width: cm 80
◾Thickness Max. of Sheet: cm 12
◾Machine Size: W = cm 240, H = cm 200, T = cm 100

EQUIPMENT: ◾Widia Nozzle - diameter mm 4;
◾Complete lace trimming of brush;
◾Pneumatic pedal control;
◾Lateral sheets holder (openon 3 sides);
◾Abrasive valve handle lever;
◾Air gun;
◾Horizontal oblò for inspection;
◾Working pressure regulation system complete with manometer

More Less

Product category: Matting/Supercalendering/etching/sand blasting technologies

Sandblasting Protection Nanogate

Innovative system of sandblasted or etched indoor glass surface protection;
◾High Performance: Alte Prestazioni: Surfaces retain their value durably over the time;
◾Durable protection of matt flass from cllecting dust and fingerprints;
◾Matt effect is not impaired;
◾Reduced waiting times because the liquid coating material HARDENS AT ROOM TEMPERATURE;
◾Available in a variety of COLOURS or TRANSPARENT;
◾QUICK and CHEAP application;
◾High UV stability;
◾IMPERVIOUS to common household detergents, typical glass cleaners and organic solvents.

More Less

Product category: Matting/Supercalendering/etching/sand blasting technologies

Vacuum Pressure Blasting Machine

TECHNICAL SPECIFICATIONS:

◾Lenght: mt. 0,53;
◾Width: mt. 0,53;
◾Height: mt. 1,7;
◾Weight: kg. 83;
◾Voltage: 220 V Monophase;
◾Power: 1200 Watt;
◾Compressed air consumption at 7 bar: 850-1200 Lt./minute;
◾Time of sandblasting surface: 25-30 minutes;
◾Width of sandblasting surface: mm 35-40;
◾Time fall regenerated abrasive: 20-30 sec.;
◾Raccomended Abrasive: Aluminum Oxide - grain 40-80

EQUIPMENT:

◾Abrasive recycling system by vacuum aspirator;
◾Sandblasting unit having a capacity of liter 24;
◾Pressure reducer for the compressed air which supplies the sandblasting machine;
◾Sandblasting and suction hoses - Lenght mt. 4;
◾Brush head complete with Widia Nozzle diameter mm 4

More Less

Product category: Matting/Supercalendering/etching/sand blasting technologies

Sandblasting machine with free spray

TECHNICAL SPECIFICATIONS:

Length:
mt. 0,315thumb_GETTO_LIBERO;
Width: mt. 0,315;
Height: mt. 0,785;
Weight: kg. 43;
Compressed air consumption: 850-1200 Lt./minute;
Reccomended Abrasive: Aluminum Oxide - grain 40-80.

EQUIPMENT:

Sandblasting unit having a capacity of liters 24;
Pressure reduce for the compressed air which supplies the sandblasting machine;
Work equipment with Windia Nozzle diameter mm 4;
Abrasive valve with handle lever.

More Less

Product category: Matting/Supercalendering/etching/sand blasting technologies

Miniblast-R

Vacuum Pressure Sandblasting Machine With Recovery Of Abrasive
Portable, practical and easy to move, abrasive recovery. It works with compressor from 300 liters/minute.

Equipment:

◾Sandblasting gun with brush and nozzle 4mm;miniblast_r_ritagliata1
◾Device for remote control;
◾Vacuum 1100 W;
◾Recovery Hose 4 meters;
◾Blasting Hose 4 meters;
◾Filtered air connection (for possibility of masking);
◾Valve for sand control;
◾Tank capacity 15 liters;
◾Sizes: 30 cm x 40 cm x h = 160 cm;
◾Empty Weight: 45 Kg.

Optionals:

◾HOSE for Sandblasting 4 meters complete of WIDIA NOZZLE 3 MM;testa_a_spazzola
◾Further MICRO HOSE complete of NOZZLE 2 mm for Small Works of Restoration

More Less

About us

Company details

FC srl was founded in 1996 from the experience gained in the production of glass cutting optimization software. We made then product lines for the decoration of glass with sandblasting, combined with the same processing technology in the marble.Another range of products are: sandblaster for marbles and accessorier for glass industries.

2004 - FC srl became the distributor for Italy of CadRam / Regalead products (www.regalead.co.uk)
2010 - FC srl became the distributor for Italy of Nanogate products for protection of sandblasted glasses

More Less

Company data

Target groups

Manufacturing, Processing and Finishing