Premium Exhibitor

UNION Instruments GmbH

Zeppelinstr. 42 , 76185 Karlsruhe
Germany

Telephone +49 721 680381-20
Fax +49 721 680381-33
sales@union-instruments.com

Trade fair hall

  • Hall 15 / C03
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 15): stand C03

Fairground map

glasstec 2016 fairground map: Hall 15

Our range of products

Product categories

  • 01  Glass production/Production Technology
  • 01.04  Glass melting technology
  • 01.04.09  Combustion technology
  • 01.04.09.01  Combustion technology for oil and gas fired melting furnaces

Combustion technology for oil and gas fired melting furnaces

  • 01  Glass production/Production Technology
  • 01.04  Glass melting technology
  • 01.04.09  Combustion technology
  • 01.04.09.02  Combustion technology for oxy-fired systems
  • 02  Glass processing and finishing
  • 02.12  Environmental protection/Recycling
  • 02.12.02  Glass Melting / Waste gas technologies
  • 02.12.02.02  NOx reduction technology, emission reduction technology

NOx reduction technology, emission reduction technology

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.02  Inspection technology
  • 05.01.02.02  Measurement, control and inspection of gas mixture

Measurement, control and inspection of gas mixture

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.05  Control and automation technology

Control and automation technology

Our products

Product category: Combustion technology for oxy-fired systems

Pressure and temperature measuring devices ESS

The devices of the ESS3 series are used to measure and save the pressure, differential pressure, temperature, and quantity in supply networks for gas, water, and other media. The portable data loggers with battery backup saves the pressure history for up to several years. They can also be used in hazardous areas (Zone 1).

Use of the ESS3 devices covers the following areas:

-Continuous pressure monitoring in gas pressure control and measuring systems
-Portable problem analysis in gas and water networks
-Validations of pipe network calculations
-Leak testing in gas and water networks
-Leak testing in industry

More Less

Product category: Combustion technology for oxy-fired systems

Pressure and temperature measuring devices DPK

The pressure test kits of the DPK3 R1 and DPK3 R2 series are used to perform leak tests on pipelines and fittings. A data logger for pressure and temperature measurements logs the test pressures and temperatures. A test report is created at the construction site via a battery-operated printer. The measurement data can be transferred to a PC for further archiving and evaluation.

Use of the DPK3 covers the following areas:

-Gas supply line according to DVGW G469
-Water supply line according to DVGW W400-2
-Pipelines according to VdTÜV 1051
-Long-distance heating lines according to AGFW FW 602
-Cable protection tubes
-Pressure tanks
-Industrial fittings (e.g., heat exchangers in process industry)

More Less

Product category: Measurement, control and inspection of gas mixture

 Multi-Gasanalyzers INCA

INCA is a modular freely user configurable measurement device for multi-component gas analysis in the bio and natural gas industries. Thousands of INCA devices are operating in the gas industry all over the world.

The INCA concept is designed to provide a custom made analysis system for specific application using standard modules for: sample gas supply, sample gas processing, sensor control and data processing. This approach guarantees the best possible analysis results, optimized cost structure in production and operation, short delivery times and facilitates retrofitting and/or replacement of components in the future.

The INCA measurement technology is an independent technical unit in which all components like sensors, pumps, valves and more are mounted on a carrier plate and connected to the control unit via an internal device bus. The individual assembly with sensors (via sensor modules) is determined by customer’s specifically required application.

This measurement unit is – in a second step - configured as a complete device system-solution with enclosures for in- and outdoor areas or even EX-areas. It is available with or without gas cooler or measuring point switching.

The modular design concept leads to variable specifications for intended applications of the INCA devices. The devices of the series INCA1000 and INCA3000 do overlap in their application possibilities. The cost and size-related benefit is up to INCA1000 whereas the INCA3000 offers a greater variety in performance and possibilities.

More Less

Product category: Measurement, control and inspection of gas mixture

Calorimeter CWD

The CWD2005xxx-device series Calorimetry, Wobbe-Index und Specific Density) comprises versions of combustion calorimeters for direct and continuous determination of gas quality from the following measurands and operands:

-Wobbe-lndex
-Specific density
-Heating and combustion values
-Combustion Air Requirement (CARI) and air requirement, with integrated gas analysis
-Energy quantity, with expanded system EMS2005.

The Wobbe index and specific density are measured, and the heating value and combustion value are calculated from these measurements.

When components for gas analysis are added to the CWD2005, the air requirement, or CARI, can also be determined from the analyzed gas composition.

The operating principle of the CWD enables all combustible gas components to be detected, which allows it to be used even for gases with rapidly changing gas composition.

More Less

Product category: Control and automation technology

Isolation Tester UIP

The devices of the UIP (Union Isolations Prüfer) isolation tester series are used to test the pore-free condition of corrosion protection coatings of pipes, vessels or plant system parts. The battery-powered device generates test voltages between 5 kV and 30 kV, which are applied to the grounded test object via test electrodes. The location of a defect is signalized by a spark-over with an additional audible warning.

Coating testing of

-Pipes
-Tanks
-Vessels
-Buildings

More Less

About us

Company details

UNION Instruments GmbH is a worldwide supplier of sophisticated gas analysis and data logging equipment with development and production facilities in Karlsruhe and Lübeck.
The products of UNION Instruments GmbH are distributed worldwide to customers of different branches. These customers include gas and water suppliers (local distribution companies), steel producers, the chemical industry as well as operators and manufacturers of biogas- and sewage plants. The product line of UNION Instruments can be separated into the sections of gas analysis and data loggers for pressure and temperature. Through continuous enhancement of the products, existing markets will be further developed and innovations will pave the way to entering new markets. The overall goal is to create new and secure existing jobs by means of stable growth.

More Less

Company data

Target groups

Manufacturing, Processing and Finishing