PED-X PMMA smart glass film
Strong adhesion strength with PMMA
Low temperature , 75 ~80 degree
Operation Procedure（take 5mm glass +0.38mm film +5mm galss for example）：
Sandwich film between two glass, fix all corners with high temperature tape in case of displacemant.
Turn on Vaccum pump for 5 to 10 minutes. Make sure the silicone bag no air left.
Put into furnace, heating up to 60-65 degree( glass surface). holding temperature 15 minutes.
Go on heating up to 75 to 80 degree(glass surface), holding temperature 50 minutes.
Cool down under 60 degree, then turn off vacuum pump. Open furnace, take out glass.