Hakon steel s.r.o

Hlavanova 377/20 , 32600 Plzen
Czech Republic

Telephone +420 377 421940
Fax +420 377 449740
hakon@hakon.cz

Trade fair hall

  • Hall 14 / G48
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 14): stand G48

Fairground map

glasstec 2016 fairground map: Hall 14

Our range of products

Product categories

  • 01  Glass production/Production Technology
  • 01.13  Conveying, transport, packing and warehouse technology
  • 01.13.05  Warehouse technology

Our products

Product category: Warehouse technology

Motorized frame racks

Type RJTM
is meant for storage of glass sheets. Vertical loading area is fitted with 3mm felt padding and the bottom area is fitted with 15mm plywood.

Type RBM
is meant for storage of crates. Vertical supports are fitted with 4 pads for easy disassembly of wooden package and to support the glass.

Construction: Steel frame is welded from steel profiles with surface painted in RAL colours. Loading frames are guided together on two rail tracks of only 20 mm in height which allows easy access to manipulation area. This construction ensures maximum comfort and safety for the operator while increasing productivity. Frames are powered by electromotor with 230V power supply. From 15 positions the system is standardly equipped with remote control. The frame rack can be fitted with a manual drive that can be later replaced with an electromotor.

Manipulation of electric version: Upon stepping on the pedal in the selected position and pressing the activation button, the frames are automatically moved to the end positions, creating a gap in front of the selected position. During the process, the operator can carry out other preparatory tasks. The drive is stopped automatically if the operator enters the manipulation area while it is moving.

Manipulation of manual version: Upon stepping on the pedal in the selected position and rotating the mechanical transmission lever, you can move the frames to the end positions, creating a gap in front of the selected position. The effective length of the lever can be adjusted so that an adequate strength to move a required number of frames is ensured.

More Less

Product category: Warehouse technology

Frame racks for PLF blocks

Type RJTM 600
is meant for storage of PLF format blocks.

Type RJTM 650
is meant for storage of PLF format blocks or two DLF format blocks.

Construction: Steel frame is welded from steel profiles with surface painted in RAL colours. The glass stays on the bottom of frame, which is fitted with textile-fiber-reinforced rubber stripes. Vertical loading area is fitted with 5mm felt padding. The frames are lined up on two longitudinal rail tracks. End storage positions are fixed and have loading capacity of 30 000 kg. These positions serve as a storage rack for the most frequent types of glass. The frames are moved by hydraulic drive unit with simple, semiautomatic or automatic control.

Operation with simple control: By moving the lever of secure mechanism the opening position is selected. Followed by pressing a button on the control panel the frames are moved to the end positions, creating a gap in front of the selected position. Operator must hold the button during the process.

Operation with semiautomatic control: By moving the lever of secure mechanism the opening position is selected. Followed by pressing a button on the remote control, the frames are moved to the end positions, creating a gap in front of the selected position. Operator is allowed to do other preparation works during the process.

Operation with automatic control: By pressing a button on the control panel, the frames are automatically moved to the end positions, creating a gap in front of the selected position. Operator is allowed to do other preparation works during the process.

More Less

Product category: Warehouse technology

Drawer racks

Type BBL
Purpose: BBL drawer racks are meant for storage of crates with maximum space saving and easy access.

Construction: Steel frames are welded from steel profiles with surface painted in RAL colours. Drawers are guided by bearing rolls and run on high-load wheels with 200mm in diameter. Drawers with load capacity 1000kg and more have second wheel made of steel guided on rail tracks. BBL type has vertical supports fitted with 4 pads for easy disassembly of wooden package and to support the glass.

Type BJT
Purpose: BJT drawer racks are meant for storage of glass sheets with maximum space saving and easy access.

Construction: Steel frames are welded from steel profiles with surface painted in RAL colours. Drawers are guided by bearing rolls and run on high-load wheels with 150 mm in diameter. Drawers with load capacity 1000kg and more have second wheel made of steel guided on rail tracks. BJT type has vertical loading area fitted with felt stripes and the bottom fitted with plywood plate and rubber stripes.

More Less

Product category: Warehouse technology

Truck for END-CUPs VB 2000

Purpose: Meant for storage of crates with dimensions up to 2300/3400/200 mm. Special construction of chassis (so called swing) guarantees easy manipulation even with high loads. In case of interest it is possible to fit the truck with additional clamp bars, which increase safety of the loaded glass during transport.

Construction: Steel frames are welded from steel profiles with surface painted in RAL colours. Vertical supports are fitted with 3 pads for easy disassembly of wooden package and to support the glass.

More Less

Product category: Warehouse technology

Slot car VH 50-60

Purpose: Meant for safe transport of glass sheets in production and for separation one from each other in 50 slots for VH50 or 60 slots for VH60. It is also possible to use the slot car as a stand (order without wheels), for example in order release where it simplifies searching and protects glass from damage.

Construction: Steel frame is welded from steel profiles with surface painted in RAL colours. Bedplate is made from softening PVC and for separation of each slot is used wire with PVC protection. The truck has 2 fixed wheels and 2 rotary wheels with 160mm in diameter for VH 50 and 200 mm for VH 60.

More Less

About us

Company details

HAKON company produces handling and warehousing equipment for glaziers. Founded in 1992, it originally focused on custom metal production. In the course of time, we started specializing in production for glazier firms and plants. Today, this domain represents our main production program, dividing into the following categories:

- Manufactory
- Storehouse
- Transport

Thanks to our original orientation, we are able to fulfill even the most atypical requirements of our customers. We are a leading Czech producer with the broadest production line, and through a network of sales representatives, our products are exported to 15 European countries.

More Less