Fluke Process Instruments GmbH

Blankenburger Str. 135 , 13127 Berlin
Germany

Telephone +49 30 4780080
Fax +49 30 4710251
raytek@raytek.de

This company is co-exhibitor of
Datapaq Ltd.

Trade fair hall

  • Hall 14 / B22
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 14): stand B22

Fairground map

glasstec 2016 fairground map: Hall 14

Contact

Jutta Schwelm

Angestellter
Marketing, Vertrieb, Werbung, PR

Blankenburger Str. 135
13127 Berlin, Germany

Phone
+49 30 478008411

Email
jschwelm@raytek.de

Our range of products

Product categories

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.01  Measurement and control
  • 05.01.01.03  Measurement and control of radiation in the melt

Measurement and control of radiation in the melt

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.01  Measurement and control
  • 05.01.01.05  Measurement and control of glass temperature
  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.05  Control and automation technology

Control and automation technology

Our products

Product category: Measurement and control of glass temperature

Fixed Thermal Imagers

Raytek ThermoView™ cameras offer thermal imaging for moving or stationary targets in process control systems. Combined with user-friendly software, these infrared cameras provide a complete solution for variety of industrial, as well as Lab and R&D applications.

ThermoView Pi20

The rugged Pi20 high performance fixed thermal imager has an IP54 rating and is offered in two temperature ranges: -40 to 500°C (-40 to 932ºF) and 200 to 2000°C (392 to 3632ºF). Its fully featured companion software, DataTemp® Pi (DTPi), can support up to 16 cameras simultaneously.

More Less

Product category: Measurement and control of glass temperature

Raytek CI

Raytek CI

• Covers temperature ranges from 0°C to 500°C (32°F to 932°F)
• Easily replaces traditional probes and thermocouples
• Accessories for cooling and air purging
• Stainless steel electronics housing

Product Description

The Raytek CI noncontact infrared pyrometer is compact and easy to install. Designed for easy integration into a standard 4-wire system, the CI sensor can easily replace traditional contact probes with a J-type or K-type thermocouple output. A 0-5 volt output is if your application is susceptible to noise or requires a longer cable run.

The CI unit's onboard electronics are protected by a rugged IP 65 (NEMA-4) stainless steel housing, allowing the sensor to function in ambient temperatures to 70°C (160°F) without cooling. With water cooling, the CI sensor can withstand ambient temperatures to 260°C (500°F).
•Type J or K, or 0-5 V output
•IP 65 (NEMA-4) stainless steel electronics housing
•4:1 optics at 90% energy
•350 mSec (95%) response time
•Powered by 12–24 VDC at 20 mA
•Accessories for cooling and air purging

More Less

Product category: Measurement and control of glass temperature

Raytek CM Infrared Sensor

•Advanced feature set for OEM applications 
• Wide -20 to 500°C (-4 to 932°F) temperature range 
• 13:1 optics at 90% energy
• 150 mSec (95%) response time
• Rugged IP 65 (NEMA-4) stainless steel housing

Product Description

The Raytek CM Infrared Sensor is designed for continuous temperature monitoring in a broad range of manufacturing processes and OEM applications. This sensor provides the advantages of infrared temperature measurement in a powerful, compact, integrated sensor. The CM sensor can easily replace traditional contact probes with a J-type or K-type thermocouple output, or with a user scaleable 0-5 volt output.

The CM's onboard electronics are protected by a rugged IP 65 (NEMA-4) stainless steel housing, allowing the sensor to function in ambient temperatures to 70°C (160°F) without cooling.

Although small in size, the CM is loaded with advanced features. An RS232 digital interface allows the user to configure all programmable sensor variables with the powerful DataTemp® Multidrop software included with each sensor. The built-in sensor health LED provides a convenient on-line indicator of the sensor's operating status and aids in troubleshooting initial sensor set up.
•Scaleable 0-5 V, type J or K output
•Alarm output
•Sensor status/self diagnostic LED indicator
•RS232 digital communications for sensor set-up and monitoring
•Adjustable signal processing
•DataTemp Multidrop software compatible
•Accessories for air purging and lens protection

More Less

Product category: Measurement and control of glass temperature

Raytek GP

• Temperature range from minus 18°C to 538°C (0°F to 1000°F)
• Available with standard or close focus optics
• Sensor parameters easily configured through display monitor
• Laser sighting available (GPS head)

Product Description

The Raytek GP infrared pyrometers come with two types of rugged sensors: GPR and GPS. They both provide standard or close focus optics and target temperature readings with 1% accuracy.

In addition, laser sighted GPS model provides alignment in hard-to-reach locations, or to the small or distant targets. The GPS is capable of measuring targets as small as 4.5 mm at 200 mm and 0.18 in @ 8 in, for the close focus version of the sensor.

The GPS targets temperatures from -18 to 540ºC (0-1000ºF) with 1% accuracy, and has a standard optical D:S ratio of 50:1. The GPS integrated coaxial Class 2 laser is connected to the remote activation switch box via the included 4 m (13 ft) cable. An additional 8 m (26 ft) of cable is also included to connect the switch box to the GP monitor.

More Less

Product category: Measurement and control of glass temperature

Raytek MI3

• Wide temperature range from -40 to 1800°C (-40 to 3272°F)
• Response time down to 10 ms
• Precision high resolution optics up to 100:1
• Intuitive user interface with high resolution LCD
• Rugged IP 65 (NEMA-4) stainless steel sensing head
• High temperature resistance for the head up to 180°C without cooling
• Available with Profinet and Ethernet communication interface
• MI3 ATEX/IECEx certified sensors

Product Description

The Raytek MI3 digital pyrometer represents a new generation of performance and innovation in continuous noncontact temperature monitoring for a broad range of OEM applications and manufacturing processes. Each MI3 infrared temperature sensor is a two-piece systems with a miniature sensing head and separate communications electronics. The miniature sensing head can be installed in any system and outperforms much larger sensors, making the Raytek MI3 the best valued IR temperature sensor in its class.

The OEMMI3 version allows direct digital communication with the host machine controller without the need for an additional communication box.

The innovative multiple sensing head interface, which can support up to 8 individually addressable heads per communication box, reduces sensor cost, simplifies sensor installation and applications troubleshooting, and provides the lowest cost per measurement point.

Explosive atmospheres at the workplace can be caused by flammable gases, mists or vapors, or by combustible dust. Raytek MI3 ATEX/IECEx certified sensors can be used safely to monitor the right temperature of such explosive processes. All standard MI3 and MI3100 heads can be ordered with optional ATEX/IECEx certification. One specifically provided Ex-proof power supply can be used with 2 sensing heads.

The MI3 is also available in a convenient DIN-rail mountable package standard with USB digital communications, as well as RS485, Profibus, Modbus, Profinet and Ethernet options. The DIN mountable communication box supports up to 8 heads and provides 4 galvanic isolated analog outputs.

More Less

About us

Company details

Founded in 1963, Raytek designs, manufactures, markets and services a complete line of infrared, noncontact temperature measurement instruments for industrial, process control and maintenance applications.

Raytek GmbH develops, manufactures, distributes, and services infrared sensors under the brands of RAYTEK and IRCON for non-contact temperature measurement within a range from -50 to +3,500 °C. The sensors allow for quick and accurate measurements of surface temperatures without touching the medium. Typical applications include steelworks, glassworks, cement plants, and plastics manufacturing. The product range includes fixed infrared sensors, infrared linescanners, and thermal imagers. All the devices are suitable for fixed installation in plants and machines and can be integrated into process-monitoring systems via industry-specific interfaces.

Raytek has more than 50 years of experience in infrared temperature measurement. Raytek GmbH in Berlin is responsible for marketing, sales, and service in Europe, Africa, and the Middle East. Regional offices and numerous authorized distributors around the globe ensure customer proximity, rapid service, and individual consultation on site. Raytek is a Fluke company. A sister company in the Fluke Group is DATAPAQ, a world leader in the manufacture of temperature measurement and analysis systems for all types of industrial heating processes.

More Less

Company data

Sales volume

20-100 Mio US $

Export content

max. 50%

Number of employees

101-500

Foundation

1963

Area of business
  • Glass manufacture / Production technology
  • Measurement, testing, control technology and software
Target groups
  • Manufacturing, Processing and Finishing
  • Solar Glass/Technical Glass