Premium Exhibitor

Casso-Solar Technologies LLC

506 Airport Executive Park , 10954 Nanuet, NY
USA

Telephone +1 845 354-2010
Fax +1 845 547-0328
sales@cassosolartechnologies.com

Trade fair hall

  • Hall 13 / B61-1
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 13): stand B61-1

Fairground map

glasstec 2016 fairground map: Hall 13

Our range of products

Product categories

  • 01  Glass production/Production Technology
  • 01.09  Kiln technology
  • 01.09.03  Annealing lehrs, continuous/intermittent operation

Annealing lehrs, continuous/intermittent operation

  • 01  Glass production/Production Technology
  • 01.09  Kiln technology
  • 01.09.04  Decorating lehrs

Decorating lehrs

  • 01  Glass production/Production Technology
  • 01.09  Kiln technology
  • 01.09.05  Pre-heating furnaces

Pre-heating furnaces

  • 01  Glass production/Production Technology
  • 01.09  Kiln technology
  • 01.09.06  Fusing Kilns

Fusing Kilns

  • 02  Glass processing and finishing
  • 02.03  Edge and surface finishing technology
  • 02.03.07  Printing technology
  • 02.03.07.04  Spraying technology

Spraying technology

  • 02  Glass processing and finishing
  • 02.06  Coating technology
  • 02.06.02  Enameling machines, thermal printing equipment

Enameling machines, thermal printing equipment

  • 02  Glass processing and finishing
  • 02.06  Coating technology
  • 02.06.05  Dryers and enameling furnaces

Dryers and enameling furnaces

  • 02  Glass processing and finishing
  • 02.07  Electronic display glass technology
  • 02.07.01  Machines and equipment for the production of display glass
  • 02  Glass processing and finishing
  • 02.09  Safety glass technology
  • 02.09.02  Laminated glass technology
  • 02.09.02.01  Laminated glass technology with foil for architectural glass

Laminated glass technology with foil for architectural glass

  • 02  Glass processing and finishing
  • 02.09  Safety glass technology
  • 02.09.02  Laminated glass technology
  • 02.09.02.02  Laminated glass technology with foil for automotive glass

Laminated glass technology with foil for automotive glass

Our products

Product category: Decorating lehrs

Decorating

Glass Decorating, for both interior and exterior, is easily accomplished when partnering with Casso-Solar Technologies.

Spandrel glass or fully coated/decorated sheets of glass are precisely made with a direct/reverse roll coater, large area semi-automatic screen printer and infrared drying/curing system. Ceramic, epoxy, silicone, urethane and enamel inks can be applied to created mosaic patterns, marble effects, stripes, dots, geometric decorations, etch finishes and solid sheet colors. Glass sizes from standard to jumbo sheets.

Ceramic inks are fired into the glass as part of a tempering or annealing operation. Other inks can be applied to annealed, heat strengthened or tempered glass.

More Less

Product category: Machines and equipment for the production of display glass

Screen Printing, Drying & Cooling for Appliance Control Panels, Stove Tops and Oven Doors

Casso-Solar Technologies Ceramic Ink Drying Systems lead the industry in processing water base, water miscible, terpinol and pine oil based inks, leaded or lead free. Special attention is given to maximize green strength on low resin content inks, allowing for safe handling. Combination systems of infrared and convection enhance drying capability. Cooling systems are designed to bring glass and ink temperatures to or below ambient for overprinting. Dryers are compact, energy efficient with little maintenance over years of service life. Casso-Solar Technologies works closely with the ceramic ink manufacturers and maintains an extensive library on current inks used in the industry.

More Less

Product category: Machines and equipment for the production of display glass

Heat Treating Oven Doors & Stove Tops

Oven doors may be heat treated for strengthening, curing tints and decorations, hard coats and more.

Systems are designed to run vertically in frames or horizontally if the glass is flat.

 

More Less

Product category: Laminated glass technology with foil for architectural glass

Architectural Glass

Laminating

Continuous Laminating Lines may consist of an entry washer; temperature controlled lay up room with PVB unwind stands, overhead glass transfer assists and pop-up caster tables; preheat ovens to bring laminate to 110-120°F prior to first de-airing press; oversized roll de-airing press; tacking oven to bring the laminate to 160-180°F; final tacking press and unload conveyor with overhead assist. Full PLC recipe control.

For customers processing coated or low-E products, Casso-Solar Technologies Full Top Convection Systems reclaims the lost production volume over uncoated products.

Casso-Solar Technologies systems are available to run with and without an Autoclave. Production requirements determine which system is best for you.

Recommendations for new and used autoclaves can also be provided.

NEW !! - Conveyorized Non-Autoclave Laminating Line

More Less

Product category: Laminated glass technology with foil for automotive glass

Laminating- Flat and Curved Glass

Continuous preheat and tacking ovens to allow for proper de-airing of windshields and to tack the glass for further processing in the autoclave. Glass temperatures exiting the preheat are 100-120°F and exiting the tacking oven at 170-180°F. Medium wavelength heaters penetrate the glass to heat the PVB/glass interface. Designed for either short edge or long edge leading. Pin conveyors as shown in the photo, are used for bent glass laminating. Ovens also available for vacuum ring applications, batch or continuous.

More Less

About us

Company details

Casso-Solar Technologies LLC has over 50 years combined experience in concept and design of industrial heating systems for the glass industry.

Glass Laminating Systems - Batch without Autoclave, Continuous Press with and without Autoclave, Continuous Vaccum Laminating with and without Autoclave - Interlayer materials including PVB, DuPont SentryGlas, EVA, Urethane and more. Architectural, Automotive, Noise Reduction, Ballistic and Photovoltaic Applications. NEW CONVEYORIZED NON-AUTOCLAVE LAMINATING SYSTEM WILL BE INTRODUCED AT THE SHOW.

Glass Decorating Systems -  May incorporate screen printing, roll coaters for spandrel, digital printing with IR, combination IR/Convection or UV drying/curing. Complete package with cooling. Compatible with water miscible and solvent ceramic inks, silicone inks such as ICD Opaci-Coat, expoy and other inks. Architectural, Automotive, Appliance and Photovoltaic Applications.

Bending Systems - Annealed, Multizone, shuttle or indexing systems. Architectural, Automotive Ballistic, and Aircraft Applications

Custom Furnaces - Vertical and horizontal, rolling hearth, anneal and more Replacement and Retrofit oven and furnace heaters

More Less

Company data

Target groups
  • Manufacturing, Processing and Finishing
  • Architecture / Construction
  • Solar Glass/Technical Glass