Guangzhou Huichi Glass Technical Co., Ltd.

2nd Floor West, Building No. A27, Huifu Ind. Zone, Tianxin Cun Xicha Road , 510407 Guangzhou
China, People's Republic of

Telephone +86 20 36499996
Fax +86 20 36492206
info@huichiglass.com

Trade fair hall

  • Hall 9 / B66-6
 Interactive Plan

Hall map

glasstec 2016 hall map (Hall 9): stand B66-6

Fairground map

glasstec 2016 fairground map: Hall 9

Our range of products

Product categories

  • 02  Glass processing and finishing
  • 02.09  Safety glass technology
  • 02.09.02  Laminated glass technology
  • 02.09.02.01  Laminated glass technology with foil for architectural glass

Our products

Product category: Laminated glass technology with foil for architectural glass

HC-170-5 Glass laminating machine Five layers

Characteristic of the finished product with the Laminated machine:
1 High transparency and well -distributed.
2 Solving the serious gummosis on the edge of the laminated glass, it keeps the best original thickness.
3 The finished products with the color EVA FILM shows the well-distributed of the color.
4 Laminated glass won’t appear spontaneous explosion and spontaneous cracking phenomenon.
Especially the thickness of the laminated glass is less than 3cm, and this is the advantage we have that other machine can’t be achieved.
5 The high transparent EVA FILM for outdoor used we produced applys to acid condition that you won’t worry about glasses would be delaminated.
6 The machine can be used to the production of photoelectric glass, smart glass and and home-electric laminated glass.

Characteristic of the Machine:
Laminated machine (The vacuum thermal laminating machine) is produced by guangzhou huichi glass technical company for the production of the laminated glass. Under the vacuumize circumstance with the vacuum bag, EVA FILM and glass will be heating together until the EVA FILM melted so that the two pieces of the glass can bonding together. Also, we can put some fabric and paper into two pieces of glasses to process, and the finished products we called it decoration glasses. Machine with simple structure, low energy consumption, reliable quality, less floor space, low investment, high output is suitable for industrialized.

operating principle and characteristic:
operating principle:

In the vacuum condition heat the laminated material and glass together until the plastic melt, so they can join together. It also can process silk、paper、 calligraphy and painting、ultraviolet radiation unilateralism film、light adjusted film and so on with glass to produce all kinds of art glass or decorated glass..

Characteristic:
① Oven afford horizontally heating, so that quantity of heat is equality in the oven, low heat waste.
② Vacuum bed is made by high quality silica gel, can use for a long time
③ Control box is designed concision, process one-set complete, easy to operate.
④ Effective use of space: no restrict by the shape and thickness.
⑤ Save electricity: produce one batch(one floor) in about 2 hours ,consume 20 kilowatt hour
⑥ Without the limitation of the glass shape and thickness, you can place the glasses untrammeled within the vacuum bag. Also, you can process multilayer glasses through our technician’s guidance.

Notice:
1 Glass is a poor conductor of heat. Trying to put the same thickness of the glass into the machine to process but not the different thickness. The heat transfer will be more quickly when the glass is thinner. You can extend the time of high- temperature section so that can be endothermic and plying-up enough.

2 Different thickness of the fabric material must use the different thickness of the EVA FILM when you process. Thin and fine fabric can use the 0.25mm of EVA film.Oppositely, Thick and coarse must use 0.38mm of EVA film.

3 Our EVA film: 70℃ soften,90℃ melt,110℃ molten condition。When the temperature is up to 120℃,keeping 40min, then temperature of the middle of the EVA film can be up to 110℃.

4 Different thickness of the EVA film have different mobility of the warming. The thicker of the EVA film is, mobility will arise. Such as 0.76mm of the EVA film, you can adjust the temperature and time to control to avoid bubble on the edge because of the gummosis when you process.

5 The flatness of the glass has an great influence to the quality of the laminated glass. Bad flatness should use multilayer EVA film to process to ensure teh quality of the lamination. It will broken and generate a lot of bubbles if you use the bad flatness of the glass. Please be careful!

6 Compare to transparency of the PVB, our EVA film may not good enough , but when we
have advantage in wire glass production that PVB can not compare.

More Less

Product category: Laminated glass technology with foil for architectural glass

HC-180-3A Two layers Glass laminating machine

Characteristic of the Machine:
Laminated machine (The vacuum thermal laminating machine) is produced by guangzhou huichi glass technical company for the production of the laminated glass. Under the vacuumize circumstance with the vacuum bag, EVA FILM and glass will be heating together until the EVA FILM melted so that the two pieces of the glass can bonding together. Also, we can put some fabric and paper into two pieces of glasses to process, and the finished products we called it decoration glasses. Machine with simple structure, low energy consumption, reliable quality, less floor space, low investment, high output is suitable for industrialized.
Characteristic of the finished product:
1 High transparency and well -distributed.
2 Solving the serious gummosis on the edge of the laminated glass, it keeps the best original thickness.
3 The finished products with the color EVA FILM shows the well-distributed of the color.
4 Laminated glass won’t appear spontaneous explosion and spontaneous cracking phenomenon.
Especially the thickness of the laminated glass is less than 3cm, and this is the advantage we have that other machine can’t be achieved.
5 The high transparent EVA FILM for outdoor used we produced applys to acid condition that you won’t worry about glasses would be delaminated.
6 The machine can be used to the production of photoelectric glass, smart glass and and home-electric laminated glass.

operating principle and characteristic:
operating principle:

In the vacuum condition heat the laminated material and glass together until the plastic melt, so they can join together. It also can process silk、paper、 calligraphy and painting、ultraviolet radiation unilateralism film、light adjusted film and so on with glass to produce all kinds of art glass or decorated glass..

Characteristic:
① Oven afford horizontally heating, so that quantity of heat is equality in the oven, low heat waste.
② Vacuum bed is made by high quality silica gel, can use for a long time
③ Control box is designed concision, process one-set complete, easy to operate.
④ Effective use of space: no restrict by the shape and thickness.
⑤ Save electricity: produce one batch(one floor) in about 2 hours ,consume 15 kilowatt hour
⑥ Without the limitation of the glass shape and thickness, you can place the glasses untrammeled within the vacuum bag. Also, you can process multilayer glasses through our technician’s guidance.

Notice:
1 Glass is a poor conductor of heat. Trying to put the same thickness of the glass into the machine to process but not the different thickness. The heat transfer will be more quickly when the glass is thinner. You can extend the time of high- temperature section so that can be endothermic and plying-up enough.

2 Different thickness of the fabric material must use the different thickness of the EVA FILM when you process. Thin and fine fabric can use the 0.25mm of EVA film.Oppositely, Thick and coarse must use 0.38mm of EVA film.

3 Our EVA film: 70℃ soften,90℃ melt,110℃ molten condition。When the temperature is up to 120℃,keeping 40min, then temperature of the middle of the EVA film can be up to 110℃.

4 Different thickness of the EVA film have different mobility of the warming. The thicker of the EVA film is, mobility will arise. Such as 0.76mm of the EVA film, you can adjust the temperature and time to control to avoid bubble on the edge because of the gummosis when you process.

5 The flatness of the glass has an great influence to the quality of the laminated glass. Bad flatness should use multilayer EVA film to process to ensure teh quality of the lamination. It will broken and generate a lot of bubbles if you use the bad flatness of the glass. Please be careful!

6 Compare to transparency of the PVB, our EVA film may not good enough , but when we
have advantage in wire glass production that PVB can not compare.

More Less

Product category: Laminated glass technology with foil for architectural glass

HC-170-5A Glass laminating machine Five layers

Characteristic of the finished product with the Laminated machine:
1 High transparency and well -distributed.
2 Solving the serious gummosis on the edge of the laminated glass, it keeps the best original thickness.
3 The finished products with the color EVA FILM shows the well-distributed of the color.
4 Laminated glass won’t appear spontaneous explosion and spontaneous cracking phenomenon.
Especially the thickness of the laminated glass is less than 3cm, and this is the advantage we have that other machine can’t be achieved.
5 The high transparent EVA FILM for outdoor used we produced applys to acid condition that you won’t worry about glasses would be delaminated.
6 The machine can be used to the production of photoelectric glass, smart glass and and home-electric laminated glass.

Characteristic of the Machine:
Laminated machine (The vacuum thermal laminating machine) is produced by guangzhou huichi glass technical company for the production of the laminated glass. Under the vacuumize circumstance with the vacuum bag, EVA FILM and glass will be heating together until the EVA FILM melted so that the two pieces of the glass can bonding together. Also, we can put some fabric and paper into two pieces of glasses to process, and the finished products we called it decoration glasses. Machine with simple structure, low energy consumption, reliable quality, less floor space, low investment, high output is suitable for industrialized.

operating principle and characteristic:
operating principle:

In the vacuum condition heat the laminated material and glass together until the plastic melt, so they can join together. It also can process silk、paper、 calligraphy and painting、ultraviolet radiation unilateralism film、light adjusted film and so on with glass to produce all kinds of art glass or decorated glass..

Characteristic:
① Oven afford horizontally heating, so that quantity of heat is equality in the oven, low heat waste.
② Vacuum bed is made by high quality silica gel, can use for a long time
③ Control box is designed concision, process one-set complete, easy to operate.
④ Effective use of space: no restrict by the shape and thickness.
⑤ Save electricity: produce one batch(one floor) in about 2 hours ,consume 20 kilowatt hour
⑥ Without the limitation of the glass shape and thickness, you can place the glasses untrammeled within the vacuum bag. Also, you can process multilayer glasses through our technician’s guidance.

Notice:
1 Glass is a poor conductor of heat. Trying to put the same thickness of the glass into the machine to process but not the different thickness. The heat transfer will be more quickly when the glass is thinner. You can extend the time of high- temperature section so that can be endothermic and plying-up enough.

2 Different thickness of the fabric material must use the different thickness of the EVA FILM when you process. Thin and fine fabric can use the 0.25mm of EVA film.Oppositely, Thick and coarse must use 0.38mm of EVA film.

3 Our EVA film: 70℃ soften,90℃ melt,110℃ molten condition。When the temperature is up to 120℃,keeping 40min, then temperature of the middle of the EVA film can be up to 110℃.

4 Different thickness of the EVA film have different mobility of the warming. The thicker of the EVA film is, mobility will arise. Such as 0.76mm of the EVA film, you can adjust the temperature and time to control to avoid bubble on the edge because of the gummosis when you process.

5 The flatness of the glass has an great influence to the quality of the laminated glass. Bad flatness should use multilayer EVA film to process to ensure teh quality of the lamination. It will broken and generate a lot of bubbles if you use the bad flatness of the glass. Please be careful!

6 Compare to transparency of the PVB, our EVA film may not good enough , but when we
have advantage in wire glass production that PVB can not compare.

More Less

Product category: Laminated glass technology with foil for architectural glass

HC-170-5B Five layers Glass laminating machine

Characteristic of the finished product with the Laminated machine:
1 High transparency and well -distributed.
2 Solving the serious gummosis on the edge of the laminated glass, it keeps the best original thickness.
3 The finished products with the color EVA FILM shows the well-distributed of the color.
4 Laminated glass won’t appear spontaneous explosion and spontaneous cracking phenomenon.
Especially the thickness of the laminated glass is less than 3cm, and this is the advantage we have that other machine can’t be achieved.
5 The high transparent EVA FILM for outdoor used we produced applys to acid condition that you won’t worry about glasses would be delaminated.
6 The machine can be used to the production of photoelectric glass, smart glass and and home-electric laminated glass.

Characteristic of the Machine:
Laminated machine (The vacuum thermal laminating machine) is produced by guangzhou huichi glass technical company for the production of the laminated glass. Under the vacuumize circumstance with the vacuum bag, EVA FILM and glass will be heating together until the EVA FILM melted so that the two pieces of the glass can bonding together. Also, we can put some fabric and paper into two pieces of glasses to process, and the finished products we called it decoration glasses. Machine with simple structure, low energy consumption, reliable quality, less floor space, low investment, high output is suitable for industrialized.

operating principle and characteristic:
operating principle:

In the vacuum condition heat the laminated material and glass together until the plastic melt, so they can join together. It also can process silk、paper、 calligraphy and painting、ultraviolet radiation unilateralism film、light adjusted film and so on with glass to produce all kinds of art glass or decorated glass..

Characteristic:
① Oven afford horizontally heating, so that quantity of heat is equality in the oven, low heat waste.
② Vacuum bed is made by  high quality silica gel, can use for a long time
③ Control box is designed concision, process one-set complete, easy to operate.
④ Effective use of space: no restrict by the shape and thickness.
⑤ Save electricity: produce one batch(one floor) in about 2 hours ,consume 20 kilowatt hour
⑥ Without the limitation of the glass shape and thickness, you can place the glasses untrammeled within the vacuum bag.  Also, you can process multilayer glasses through our technician’s guidance.

Notice:
1 Glass is a poor conductor of heat. Trying to put the same thickness of the glass into the machine to process but not the different thickness. The heat transfer will be more quickly when the glass is thinner. You can extend the time of high- temperature section so that can be endothermic and plying-up enough.

2 Different thickness of the fabric material must use the different thickness of the EVA FILM when you process.  Thin and fine fabric can use the 0.25mm of EVA film.Oppositely, Thick and coarse must use 0.38mm of EVA film.

3 Our EVA film: 70℃ soften,90℃ melt,110℃ molten condition。When the temperature is up to 120℃,keeping 40min, then temperature of the middle of the EVA film can be up to 110℃.

4 Different thickness of the EVA film have different mobility of the warming. The thicker of the EVA film is, mobility will arise. Such as 0.76mm of the EVA film, you can adjust the temperature and time to control to avoid bubble on the edge because of the gummosis when you process.

5 The flatness of the glass has an great influence to the quality of the laminated glass. Bad flatness should use multilayer EVA film to process to ensure teh quality of the lamination. It will broken and generate a lot of bubbles if you use the bad flatness of the glass. Please be careful!

6 Compare to transparency of the PVB, our EVA film may not good enough , but when we
have advantage in wire glass production that PVB can not compare.

More Less

Product category: Laminated glass technology with foil for architectural glass

HC-180-2 Two layers glass laminating machine

Characteristic of the finished product with the Laminated machine:
1 High transparency and well -distributed.
2 Solving the serious gummosis on the edge of the laminated glass, it keeps the best original thickness.
3 The finished products with the color EVA FILM shows the well-distributed of the color.
4 Laminated glass won’t appear spontaneous explosion and spontaneous cracking phenomenon.
Especially the thickness of the laminated glass is less than 3cm, and this is the advantage we have that other machine can’t be achieved.
5 The high transparent EVA FILM for outdoor used we produced applys to acid condition that you won’t worry about glasses would be delaminated.
6 The machine can be used to the production of photoelectric glass, smart glass and and home-electric laminated glass.

Characteristic of the Machine:
Laminated machine (The vacuum thermal laminating machine) is produced by guangzhou huichi glass technical company for the production of the laminated glass. Under the vacuumize circumstance with the vacuum bag, EVA FILM and glass will be heating together until the EVA FILM melted so that the two pieces of the glass can bonding together. Also, we can put some fabric and paper into two pieces of glasses to process, and the finished products we called it decoration glasses. Machine with simple structure, low energy consumption, reliable quality, less floor space, low investment, high output is suitable for industrialized.

operating principle and characteristic:
operating principle:

In the vacuum condition heat the laminated material and glass together until the plastic melt, so they can join together. It also can process silk、paper、 calligraphy and painting、ultraviolet radiation unilateralism film、light adjusted film and so on with glass to produce all kinds of art glass or decorated glass..

Characteristic:
① Oven afford horizontally heating, so that quantity of heat is equality in the oven, low heat waste.
② Vacuum bed is made by high quality silica gel, can use for a long time
③ Control box is designed concision, process one-set complete, easy to operate.
④ Effective use of space: no restrict by the shape and thickness.
⑤ Save electricity: produce one batch(one floor) in about 2 hours ,consume 15 kilowatt hour
⑥ Without the limitation of the glass shape and thickness, you can place the glasses untrammeled within the vacuum bag. Also, you can process multilayer glasses through our technician’s guidance.

Notice:
1 Glass is a poor conductor of heat. Trying to put the same thickness of the glass into the machine to process but not the different thickness. The heat transfer will be more quickly when the glass is thinner. You can extend the time of high- temperature section so that can be endothermic and plying-up enough.

2 Different thickness of the fabric material must use the different thickness of the EVA FILM when you process. Thin and fine fabric can use the 0.25mm of EVA film.Oppositely, Thick and coarse must use 0.38mm of EVA film.

3 Our EVA film: 70℃ soften,90℃ melt,110℃ molten condition。When the temperature is up to 120℃,keeping 40min, then temperature of the middle of the EVA film can be up to 110℃.

4 Different thickness of the EVA film have different mobility of the warming. The thicker of the EVA film is, mobility will arise. Such as 0.76mm of the EVA film, you can adjust the temperature and time to control to avoid bubble on the edge because of the gummosis when you process.

5 The flatness of the glass has an great influence to the quality of the laminated glass. Bad flatness should use multilayer EVA film to process to ensure teh quality of the lamination. It will broken and generate a lot of bubbles if you use the bad flatness of the glass. Please be careful!

6 Compare to transparency of the PVB, our EVA film may not good enough , but when we
have advantage in wire glass production that PVB can not compare.

More Less

About us

Company details

Guangzhou Huichi Glass Technical Co.,LTD is a professional company specilizing in laminated glass and art glass technology. All the time,Huichi company always hold the principle:survive in quality develop in prestige. Our product with good quality and nice price enjoy a good reputation in domestic and abroad market.Our factory covers more than 2000 m²,and equipped with large production lines and relative facilities,have a serious system for developing ,desiging,producing,inspection.Those enable our company can meet our customers different demand.We will continue to insist the customer is supreme,the quality is first,prestige is first this purose to provide our customer with reliable products.

Guangzhou Huichi Glass was founded in 2002, the headquarters is located in Huifu industrial Zone, guangzhou city, guangdong province. After more than 10 years of technical test and experiment development, so far the company has a number of senior engineers and industry experts. Which formed Huichi company technical elite team, and has introduced the world most advanced and professional film production equipment.

Company main products: glass vacuum laminating machine, EVA film, PET film, jade sand film, fabric silk, stone film, special paper, agate film/sparkle film series, glass paint, and so on.

More Less

Company data

Target groups
  • Mechanical Engineering
  • Manufacturing, Processing and Finishing
  • Architecture / Construction