Via Marconato, 2, 20811 Cesano Maderno (MI)
Telephone +39 0362 52931
Fax +39 0362 524225


Hall map

glasstec 2016 hall map (Hall 9): stand A07

Fairground map

glasstec 2016 fairground map: Hall 9

Our range of products

Product categories

  • 04  Tools, replacement and spare parts, aucillary equipment and fittings
  • 04.10  Adhesive technology

Our products

Product category: Adhesive technology

Instant Adhesives

Cyanoacrylate adhesives are formulated for the instant and structural bonding of rubber, metals, ceramic,
leather and a variety of plastics. Best results can be obtained with joint gaps of less than 0.1 mm
up to 0.2 mm for special grades. The service temperature range is between - 50 °C and + 80 °C,
although new high-temperature resistant formalations are available for use up to 200 °C.
For porous surfaces or for vertical application a gel grade is available.

More Less

Product category: Adhesive technology

Activators & Surface Conditioners

The activators are specially designed products to speed up the cure of Anaerobic Adhesivest.
Typical conditions of use are low temperatures, large gaps, inactive or passive surfaces.

More Less

Product category: Adhesive technology

UV Light Adhesives

UV light curable adhesives polymerise in seconds by irradation with UV and visible light,
forming a solid adhesive film not yellowing over time. Designed to bond glass, crystal,
metals and some plastics.
Operating temperature range between - 50 °C and + 120 °C.
A gel formulation is available for non-drip / vertical applications.

More Less

Product category: Adhesive technology

Silicone Greases No. 4 and No. 9

Waterproof, suitable for use in contact with food and drinking water. Resistant to temperature up to +200°C and they provide low friction coefficients between metal, rubber and plastic parts. Do not cause rubber gaskets to swell.

More Less

Product category: Adhesive technology

Dosing Systems

Electro Pneumatic Dosing Unit (time-pressure) for anaerobic and cyanoacrylate adhesives. Including control unit, reservoir (with empty level sensor), valve, dosing nozzle, actuated by foot switch or metal part sensor.
Suitable for PLC connections, equipped with end cycle alarm sensor. Tubing is made by PE and PTFE flexible hoses.

More Less

About us

Company details

Loxeal Engineering Adhesives is an Italian Company specialized in the manufacturing of comprehensive range of Technically Advanced Adhesives and Sealants providing since over 35 years solutions to a wide variety of industrial uses.
The Company Quality System certified since 1993 has been mantained and improved along the time granting the high quality level of our products.
Our Anaerobic, Epoxy, Structural Acrylic, UV-light curing, Polyurethane Adhesives and other Complementary Products have been recognized to perform at the highest requirements.
Selected products have been tested by worldwide accreditated Laboratories and certified according to regulations in the field of gas sealing, potable water, medical devices.

More Less

Company data

Target groups

Manufacturing, Processing and Finishing