This fiber laser marking system applies for all types of glass materials, and can even be used on tempered and laminated glass. The marking system operates either as the stand alone marking station or it can be integrated to the production line. While integrated into the production system the operation can also be switched to the stand alone mode when necessary.
Product category: Furnaces for thermal pre-tempering of glass
Heatable Backlite Technology
AYROX has a wide range of soldering and testing equipment for heatable glass production and quality control.
The product range has been designed to fulfil different kinds of production requirements.
Testing Testing can be 100 %, random or statistical, on - line or off - line. We have suitable devices for testing a few pieces per day, and also for testing 500 pcs / h.
There is separate equipment for testing the electric circuit, the continuity of line, and the mechanical strength of the soldering. Some of the tests can be combined in one machine.
Soldering For soldering, there is equipment with a capacity reaching 200 backlites per h and these stations can be multiplied, if needed. On the other hand the manual soldering station is ideal for custom work, development or small - scale production. To facilitate positioning and / or repeatability in manual or semi-automatic equipment, docking clamps or positioning jigs can be included.
General All equipment is available as :
- manual - semi - automatic - custom automated
All automatic equipment can be modified to suit the customer’s production environment.
Machine structures and lay - out can be modified according to customer needs.
The operational components, such as soldering heads, power supply units and electrodes are standardized to always give the same, reliable results.
The automatic equipment is always custom designed, already at the quotation stage, and adapted to the customer’s own loading and unloading systems. Other modifications can be made at the same time. This ensures the right adaptation for the user’s own needs.
Semi-automatic Equipment The semi-automatic machines can be modified to some extent, taking into account for example :
- number of connectors on the backlite - number of operators available - unloading conveyors instead of manual unloading - ( location and type of soldering / testing )
Manual machines are standard, ready - to - use equipment without complicated installation procedures, equipped with automated soldering or testing cycles.
Soldering Soldering can be done :
- after tempering, on warm glass ( on - line ) - after testing of silkprinted electric circuit, on cool glass ( off - line ) - at the glass producer’s premises or in the delivery and conditioning center near the end customer’s facilities.
Testing The electric circuit testing can be done :
- after tempering - after soldering - in the laboratory
Product category: Measurement and control of glass tension
Tempered glass products should be controlled as to stresses to ensure their conformity to standards. A strain viewer is a practical, non-destructive apparatus to control products as well as production conditions.
SOFTECO strain viewer consists of a light source with polarizing filter (polarizer), and another polarizing filter (analyzer), with a wave retarder.
With the apparatus a stress pattern can be seen and stress-defects detected in color. Faults or changes in production can be followed by comparing the stress pattern of a test-piece with a sample previously tested and known as a good one.
Ayrox provides equipment and solutions to glass processors, thanks our 25 years of experience.
Where other companies can only provide a solution to a single aspect, we provide complete solutions by combining the knowledge of normative and specific customer requirements. And with thorough understanding of production technologies, we get your product ready for local or international markets.