Kömmerling Chemische Fabrik GmbH

Structural Glazing stands for a glass assembly technique in façade engineering, where the glass elements are bonded to the supporting aluminium or stainless steel structure using specially developed high performance Silicone sealants.
Static and dynamic loads on the outside façade such as dead load, climate and wind loads are transferred to the substructure by the structural bonding.

For this field of application KÖMMERLING has developed Silicone sealants which fulfil the requirements of EN 1279, including part 3 for gas filled panes as well as the requirements of ETAG 002, EN 15434 and especially for France CEKAL and SNJF. A dedicated weather sealant and adapted primers and cleaners complete the extensive product range.

So KÖMMERLING offers the most complete range of high quality sealants for the glass industry.

The cast resin method is one of the most advanced means of producing multilayer glass. The usage of cast resin technology is characterised in particular by the following advantages:

-  Low investment and operating costs in comparison with other production methods

-  Optimum soundproofing and safety of cast resin components

-  Highly flexible application, in particular when used with highly ornamental or shaped sheets of glass

KÖMMERLING offers a wide range of single and multi-component cast resins under the Ködiguard and Ködiphone brands. The different types of cast resin on offer can be perfectly matched to the field of production and application concerned.

Neutral cure
Low odour
Excellent weathering performance
Excellent UV-resistance
High temperature resistance from -40°C to +140°C
Fulfils the requirements of DIN 18 545 part 2, group E

KÖMMERLING offers a complete range of high-quality adhesives and sealants for windows.

Extremely low water vapour and gas transmission rate
Good adhesion to glass and spacer bar
Excellent constant material properties
Positive processing properties for all common
butyl extruders
Also available as pre-extruded tape

Complies with EN 1279 and approved by CEKAL
Low moisture vapour transmission rate and good gas retention
Very good adhesion to glass, aluminium, galvanised and stainless steel
Excellent processing properties
Tolerant of mix ratio deviations of up to 20%