IGK Isolierglasklebstoffe GmbH

Albert-Einstein-Str. 5, 63594 Hasselroth
Germany
Telephone +49 6055 9060-0
Fax +49 6055 9060-22
welcome@igk.global

Hall map

glasstec 2018 hall map (Hall 17): stand C72

Fairground map

glasstec 2018 fairground map: Hall 17

Our range of products

Product categories

  • 02  Glass processing and finishing
  • 02.11  Auxiliary products
  • 02.11.04  Sealants
  • 02  Glass processing and finishing
  • 02.11  Auxiliary products
  • 02.11.05  Spacers

Spacers

Our products

Product category: Sealants

IGK 311

IGK 311 is a solvent-free two-component sealant and adhesive made with polysulfide, which was developed especially as a secondary sealant and to connect multi-pane insulating glass.
IGK 311 is characterised by its above-average adhesion and very good water vapour- and gas retention rates.
The product can be processed using all conventional two-component mixing and dosing machines and two-component manual systems. IGK 311 adheres to all conventional clean, dry, grease-free and oil-free base coats used in the insulating glass industry.

More Less

Product category: Sealants

IGK 511

IGK 511 is a single-component, thermoplastic, solvent-free, UV-stable sealant made from polyisobutylene, which has been developed especially for the primary sealing of insulating glass panes.
IGK 511 is characterised by its very high level of adhesion and impermeability. It adheres outstandingly to glass, aluminium, stainless steel and galvanised steel.
IGK 511 impresses with its very rapid melting, high output  yield and a constant application volume over a very wide temperature range.

More Less

Product category: Spacers

IGK 611

IGK 611 is a single-component, thermoplastic, solvent-free spacer made from polyisobutylene, which was developed especially for use in TPS® systems.
IGK 611 is characterised by its outstanding flow and excellent adhesion to glass, both when applied hot and with the subsequent grouting of the cold pane. The excellent adhesion between IGK 611 and the polyurethane secondary sealant IGK 130 means the edge seal is also mechanically stiffened in the insulated glazing unit.
The product can be pumped very well and has a high level of stability up to a height of 20 millimetres.
In addition, IGK is the only manufacturer whose Thermoplastic Spacer® can be combined with both polysulfide and polyurethane – an economic alternative that has been proven for many years.

More Less