05 Measurement, testing, control technology and software
05.01 Measurement and control technology, sensoring
05.01.05 Control and automation technology
Control and automation technology
Product category: Grinding techniques for straight edges
Peripheral edging machine AL 6 T
Peripheral straight-line edging machine for the processing of pencil edge, OG or flat edge with arris depending on the wheels fitted on.
In order to allow concentricity of rotation, each wheel is mounted on a spindle; belt driven spindles. Wheels adjustment for different glass thickness is obtained by tilting the wheel-holder groups. The conveyors slide on guides of hardened and rectified steel. In order to avoid the wheels wear and tear, a centralized lubrication system is fitted. The conveyor is composed by pads, made of a special material, which are mounted on precision chains. Mechanical glass clamping system. All the wheels are cooled by coolant pumped from the coolant tank under pressure. All the moving parts are comfortably reachable in order to allow an easy maintenance.
Open top vertical washing and drying machine for glasses with a thickness from 3 up to 20 mm and with minimum dimensions of 350 mm.
Body of the machine and all the parts in contact with the water are made of stainless steel while an anti-corrosion covering is granted by the use of epoxy and polyurethane paints. The machine is equipped in total with four brushes which can also be available in the special version for low-e coated glasses. Hot water can also be required. The drying is done by a couple of blowers powered by a high-pressure soundproof ventilator. The inlet and outlet conveyors are motorized like the glass thickness adjustment by guaranteeing this way a better washing quality on every thickness. On the outlet conveyor it is possible to apply a black panel with inspection lamps.
Semi-automatic drilling machine with opposing heads (automatic lower head and manual upper head), particularly recommended for large productions and with a throating depth of 1.065 mm. Available also in the automatic version.
automatic adjustment of the diamond tool speed by setting the drilling diameter; automatic clamping of the glass during the drilling cycle; possibility to adjust the drilling depth on the lower head; automatic expulsion of glass cores.