The drilling machine is designed for the drilling of holes in the sheet glass. The machine allows drilling of holes from 5 to 100 mm. The engines are regulated by an electronic inverter within the extent given by the table. Due to the sophisticated system of two drilling heads, the drilled hole is clean and free of any burrs. The motorized vertical travel guarantees easy handling of the glass. Well-developed system of backstops significantly increases the working productivity. Easy manipulation in connection with low operation costs make from this machine an efficient helper for your work-shop.
Product category: Grinding techniques for straight edges
Double Spindle Edging Machine BTS 02 beta
The edging machine is designed for edging and polishing of flat or round peripheral edges of sheet glass, mirrors, etc. Processing is performed using the diamond water-cooled grinding wheels and polishing wheels. The edging machine can treat the glass sheets thicknesses from 3 to 20 mm. The edges can be processed in "C" profile, trapezial or flat according to the shape of the diamond wheel. The machine operation is very simple and it requires a minimal experience.
The saw is used for the sheet glass cutting up to 60 mm of thickness. It is possible to cut normal glass, laminated glass and various types of fire resistant glass and of bullet resisting glass. The sheet of the cut glass, diverted in 5 ° from the vertical position is put on rollers which makes handling and adjustment easy. The cutting unit moves vertically from the top to the bottom and its travel speed can be regulated by the frequency inverter. Using a simple mechanism, it is possible to make the change-over from the square cut the fixed angle of 45 °. The cooling of the cutting disc performs the closed cooling circuit with a tank, water pump, nozzles and the collecting system. The saw consists of three parts (the central unit and two side stands), which makes the transportation, manipulation and assembly easier when putting the machine into operation.