BAVELLONI SPA

Via G. Natta 16, 20823 Lentate sul Seveso (MB)
Italy
Telephone +39 0362 682201
Fax +39 0362 6822358
info@bavelloni.com

Hall map

glasstec 2018 hall map (Hall 16): stand C03

Fairground map

glasstec 2018 fairground map: Hall 16

Contact

SARA TACCHINO

Our range of products

Product categories

  • 02  Glass processing and finishing
  • 02.01  Cutting, breaking and snapping technology
  • 02.01.01  Cutting technology
  • 02.01.01.01  Cutting technology for float glass

Cutting technology for float glass

  • 02  Glass processing and finishing
  • 02.02  Drilling technology

Drilling technology

  • 02  Glass processing and finishing
  • 02.03  Edge and surface finishing technology
  • 02.03.01  Grinding techniques for flat glass
  • 02.03.01.01  Grinding techniques for straight edges

Grinding techniques for straight edges

  • 02  Glass processing and finishing
  • 02.03  Edge and surface finishing technology
  • 02.03.01  Grinding techniques for flat glass
  • 02.03.01.02  Grinding techniques for shaped glass

Grinding techniques for shaped glass

Our products

Product category: Cutting technology for float glass

Cutting table LAMY 370 S

Lamy 370 S is Bavelloni table for cutting, breaking and detaching laminated glass. It is ideal for low-e glasses: thanks to the special separation pliers, the coating does not get damaged during detachment operation. The single bridge structure leaves the working area completely free from any obstructions: glass handling, roller change and machine cleaning are very easy.

No more chips on the edge
Breaking is by a system of upper and lower wheels that never lift the glass and always keep it steady: in this way the lower edges never touch each other.

Trimming up to 60mm
Lamy 370 S can make trimming up to 60 mm even on very thick glass 8+8+4,56 mm in full automatic mode, thus considerably minimizing the scrap.

More Less

Product category: Drilling technology

Drilling machine VDM 1636 CN

VERTICAL NC MACHINE FOR DRILLING AND MILLING
The new Bavelloni vertical drilling-milling machine with double head and opposing spindles can perform even complex processing cycles in a single working station. Milling is performed while glass is stationary for great accuracy.

Top performance
Easy to use, fast and accurate in the execution thanks to the technical solutions adopted: 5.5 kW electro-spindles, movements by ball screws, brushless motors and advanced NC with simple and intuitive software.

Compact
The rotating double tool store with 8+8 positions enables to drill, counter-sink and mill in one single working station.

More Less

Product category: Grinding techniques for straight edges

Straight-line edging machine VE 350 11

TOP LEVEL PERFORMANCES
This is the straight line edger providing the best in term of flexibility, productivity and finishing, either in float glass or laminated glass grinding. With a perfect combination of many different tools (such as segmented, diamond, Bakelite, polishing, with cerium polishing with cerium oxide, felt) VE 350 11 can achieve maximum results with every type of glass, up to 40 mm thickness.

Quality at the highest level
For a super bright finishing, an optional kit for polishing with liquid cerium oxide is available. It includes a felt wheel, cerium oxide tank and pump with mixer and relevant distribution circuit.

Flexibility for the different requirements
Three diamond wheels and four polishing wheels grant the best quality of the flat edge, with the flexibility of installing diamond, Bakelite, polishing wheels and felt for polishing with liquid cerium oxide.

More Less