TEKNO KILNS SRL

Via delle Pergola, 55, 23900 Lecco
Italy
Telephone +39 0341 366433
Fax +39 0341 1712084
info@teknokilns.it

Hall map

glasstec 2018 hall map (Hall 15): stand B03

Fairground map

glasstec 2018 fairground map: Hall 15

Our range of products

Product categories

  • 02  Glass processing and finishing
  • 02.09  Safety glass technology
  • 02.09.01  Pre-tempering technology
  • 02.09.01.01  Furnaces for thermal pre-tempering of glass

Furnaces for thermal pre-tempering of glass

  • 02  Glass processing and finishing
  • 02.09  Safety glass technology
  • 02.09.01  Pre-tempering technology
  • 02.09.01.02  Furnaces for chemical pre-tempering of glass

Furnaces for chemical pre-tempering of glass

  • 02  Glass processing and finishing
  • 02.09  Safety glass technology
  • 02.09.02  Laminated glass technology
  • 02.09.02.01  Laminated glass technology with foil for architectural glass

Laminated glass technology with foil for architectural glass

  • 02  Glass processing and finishing
  • 02.09  Safety glass technology
  • 02.09.02  Laminated glass technology
  • 02.09.02.02  Laminated glass technology with foil for automotive glass

Laminated glass technology with foil for automotive glass

  • 02  Glass processing and finishing
  • 02.09  Safety glass technology
  • 02.09.03  Foil treating technology (storing, climate control, uncoiling)

Foil treating technology (storing, climate control, uncoiling)

  • 03  Glass products and applications
  • 03.09  Technical processing, treatment, finishing design.
  • 03.09.05  Glass finishing
  • 03.09.05.03  Glass painting/glass art
  • 03.09.05.03.05  Glass melting/fusion technology

Glass melting/fusion technology

Our products

Product category: Laminated glass technology with foil for architectural glass

Lamitech

The LAMITECH series is suitable for small-scale production with the ability to increase production by superimposing an additional work surface. The plastic used is an ethylene-vinyl acetate film (EVA) that has no specific requirements in terms of checking temperature or relative humidity.
Specially moulded, tempered or decorative pieces can be produced by interlaying screen printing films or glass windows made of fused glass, or glass interlayed with LCD or LED film.
The construction is sturdy and the steel structure is sandblasted and protected with epoxy enamel.

Main features:
cost-effectiveness;
excellent temperature uniformity;
temperature control over multiple independent areas;
efficient vacuum circuit with oil pump;
VACUMSOFT silicone fabric with easy closure;
programmable thermoregulator with the ability to store up to 30 programs.

More Less

Product category: Furnaces for thermal pre-tempering of glass

TG-IR

The TG-IR series is designed for the production of flat glass used in the lighting, sports accessories, optical sectors and furnishing sector

Main Features
Fused silica ceramic rollers;
Ceramic roller movement with double pre-tensioned belts;
Loading/oven/tempering/unloading independent motorisation controlled by inverters;
Panel mounted electrical resistors;
Lower resistors protected by a ceramic support
Power control with SCR on multiple independent areas both on the upper and lower part;
Electro-fan unit driven by a motor with speed regulator;
Independent vertical adjustment of the blowers;
Independent pressure control for each blower;
Process management with supervisory PLC and PC;
Maximum ease of use and programming;
UPS - emergency system that intervenes in the absence of the mains power supply;
Optical pyrometer for temperature control directly on the glass;

More Less

Product category: Furnaces for chemical pre-tempering of glass

TC

Design quality. Manufacturing quality. These are distinctive features of the kiln range for chemical tempering
The chemical tempering process is being used more and more in the architecture, nautical and automotive sectors as excellent optical qualities are achieved in addition to the excellent mechanical qualities.
The glass treated with the chemical tempering process has no visual defects unlike that with the thermal tempering process.
The thermal hardening process (thermal tempering) produces differently tensioned areas in the cross section of the glass. These tensioned areas produce a birefractive effect in the glass, visible under "iridescence" polarised light.

More Less

About us

Company details

At its factory in Lecco, Italy, Teknokilns designs and manufactures all of its complete kilns for the fusing, bending, tempering and lamination of glass.
Meticulous control of the production and quality process, from selecting components to the running of the plant, have made Teknokilns one of the market's global leaders in terms of technological innovation and reliability.
Founded in 1996 as a result of the wealth of technical knowledge held by its founders, the company is still todaymanaged and driven by Renato Andreotti and Pierfelice Cavenaghi. The partners have established a consistent growth strategy based on the durability and reliability of kilns,constant technical innovation and customer satisfaction throughout the product's life cycle.
Teknokilns adopts the most advanced solutions in the market because it is aware just how much each kiln is a strategic investment for its customers and how much the continuity of production contributes to their business success.
The company also offers engineering services to pinpoint the best position for the systemin the space available (layout), and 24/7 after-sales telephone support that goes well beyondsimple product assistance. As a matter of fact, Teknokilns provides technical and operational advice to optimise the operating parameters of the machines in production.
In this way, Teknokilns' customers benefit from high added value within a very competitive market.

More Less