Nedex Kimya Sanayi ve Tic. A.S.

Tatlisu Mahallesi Arac Sokak No. 8, Kat 1-2 Umraniye, 34775 Istanbul
Turkey
Telephone +90 216 4880155
Fax +90 216 4885296
info@nedexgroup.com

Hall map

glasstec 2018 hall map (Hall 17): stand A22

Fairground map

glasstec 2018 fairground map: Hall 17

Our range of products

Product categories

  • 02  Glass processing and finishing
  • 02.11  Auxiliary products
  • 02.11.04  Sealants

Sealants

  • 02  Glass processing and finishing
  • 02.11  Auxiliary products
  • 02.11.05  Spacers
  • 02  Glass processing and finishing
  • 02.11  Auxiliary products
  • 02.11.08  Chemicals
  • 02.11.08.01  Chemical drying - dessiccants

Chemical drying - dessiccants

Our products

Product category: Spacers

Aluminium Spacer

Aluminium spacer is the first type of spacer types, which have been produced by NEDEX Group. In order to supply the demands of partners, spacers are produced in many dimensions.

 

They are classified as cut&key and bendable versions. Aluminium material thickness varies from 0,20 mm for lower conductivity and cost efficiency up to 0,35 mm for bendability and strength. There are different sizes of spacers with nominal width from 6 mm to 20 mm. Stardard lengths are 3 m, 5 m and 6 m. Other lengths are optional on request. Name, date and imprinting are available. Also, NEDEX can produce colorful spacers on demand.

 

The production is provided by the latest roll forming and high frequency induction welding equipment for continious production of high quality products. As optional, it is possible to deliver pre-butylized spacers.

 

Please send e-mail to info@nedexgroup.com in order to request Technical Data Sheet.

More Less

Product category: Spacers

Warm Edge Spacers - Nanobar

NEDEX warm edge spacers have lowest Σλd- and Ψ-values. Their stability and material specifications make their processing in bending lines possible. They can even be installed in IG units, which are under extreme external loads. Metallic and nonmetallic coatings at the backside guarantee perfect tightness against water vapour and argon permeation. Surfaces which are in contact with sealants have very good adhesion to sealants. High UV stability, scratch resistancy of surfaces and low heat expansion coefficients are further features. They are produced in fully automatic lines with raw materials which are fogging free. It leads to reduced risk of condensation and mould formation in the edge area

Sizes between 8 mm and 20 mm in three standard colours (white, black and windowgrey) are available. Other colours and printing of the spacers are optional.

 

In summary, Nanobar warm edge spacers can be shown as high quality new generation plastic with metallic diffusion barrier with outstanding stability, rigidity, excellent thermal characteristics, perfect form, improved energy efficiency, excellent psi values, UV resistance and optical apperance.

 

Some outstanding properties of Nanobar are given below:

- High performance

- High quality, new generation materials

- Has too many perforation holes

- Stabil and rigid

- Very good thermal properties

- Perfect form

- Very good psi values

- Very high UV ve fogging free

- Perfect appearance

More Less

Product category: Chemical drying - dessiccants

KU83




 

The product is a 2-component, solvent-free adhesive/sealant based on polysulfide for the manufacturing of insulating glass units.

KU83 is certified by TNO Institute/Holland and IfT Rosenheim/Germany.

 

- Very low gas and moisture penetration rates

- High adhesion to aluminium and glass surfaces

- Long potlife times and

- Short curing times

are the most important characteristics.

More Less

About us

Company details

Since 1999, NEDEX has been playing an important role in glass industry. The goal of the firm is saving energy by increasing the insulation through the glass. Since the foundation, NEDEX has been always sensible to the environment. The firm’s mentality is producing high quality products in order to meet the demands of the glass manufacturers. NEDEX is producing chemicals and accessorizes for insulating glass. The primary product groups are molecular sieves, polysulfides, hotmelt, butyl, aluminium and warm-edge spacers and insulated edge solutions. NEDEX is producing its products in many different locations. About 250.000.000 square meters of glass are produced a year, which contain NEDEX products.

More Less