Ametek GmbH Solartron Metrology

Rudolf-Diesel-Str. 16, 40670 Meerbusch
Germany
Telephone +49 2159 9136-500
Fax +49 2159 9136-505
vertrieb.solartron@ametek.com

This company is main exhibitor of

Hall map

glasstec 2018 hall map (Hall 14): stand E52

Fairground map

glasstec 2018 fairground map: Hall 14

Our range of products

Product categories

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.01  Measurement and control
  • 05.01.01.04  Measurement and control of glass thickness
  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.02  Inspection technology
  • 05.01.02.01  Inspection of surface, contour and imperfection
  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.05  Control and automation technology
  • 05  Measurement, testing, control technology and software
  • 05.02  Regulation technology
  • 05.02.01  MRP machine and transport adjustment

MRP machine and transport adjustment

Our products

Product category: Measurement and control of glass thickness, Inspection of surface, contour and imperfection, Control and automation technology

Standard Inductive Pencil (Gauging) Probes

Contact gauge probes often provide the most cost effective solution for a wide range of measuring and positioning applications. In a conventional pencil probe the tip is pushed out using an internal spring. When installed in a fixture it is frequently required to design a mechanism to bring the probe into contact with the part being measured.

AX/S – Spring Actuation (Spring Push)
±0.25, ± 0.5, ± 1, ± 2,5, ± 5, ± 10 mm measuring ranges
Linearity better than 0.5% of measurement
Repeatability better than 0.05 µm
Range of tips available
Spring actuation
Standard tip force of 0.7 N (options available)
IP65 sealing (fully sealed options available)
Excellent sideload capability
LVDT or Half Bridge options

More Less

Product category: Measurement and control of glass thickness, Inspection of surface, contour and imperfection, Control and automation technology

Low Tip Force Inductive Probes

Feather Touch Probes have been designed to gauge delicate surfaces such as glass, thin sections, pharmaceutical products and tiny electro mechanical components. Whereas the traditional gauging probe exerts a force of 0.7N, the Feather Touch probe when operated horizontally exerts a mere 0.18N. This is achieved by replacing the naturally elastic gaiter with a close tolerance gland. On pneumatic versions air leakage through this gland is less than 2.5ml per second at 1 bar pressure, avoiding surface contamination while still providing a degree of cleaning the probe bearing.

AT – Feather Touch Spring Push
, ± 1, ± 2,5, ± 5, ± 10 mm measuring ranges
Accuracies as low as 1 µm
Up to 0.05 µm repeatability
Tip force of 0.18N (options available)
IP50 Sealing
Spring acctuation

More Less

Product category: Measurement and control of glass thickness, Inspection of surface, contour and imperfection, Control and automation technology

Inductive Transducer Accessories

Replacement Gaiters: Gaiters can be replaced when damaged. Only pneumatic push probes require gaiter rings Retrofit Right Angle Adaptor: For use with spring push gauging probes. Imperial Adaptor Sleeves: Adapter Sleeves can be used to increase the body diameter of 8mm sensors to 9.512 (3/8”). Available in lengths from 12 to 127 mm. Available with or without a split. Clamping Collet: For use with all 8 mm diameter probes. The clamping collet distributes the clamping forces evenly around the probe body. Using the supplied grub screw, the probe can be loosened while holding the collet in place. Extension Cables for analogue sensors with 5 pin DIN 240° connectors are available for LVDR and Half Bridge Types.

Accessories
Replacement Gaiters
Imperial Adapter Sleeves
Clamping Collets
Right angle adapters
Extention Cables

More Less

About us

Company details

About Solartron Metrology
Solartron Metrology is a world leader in the innovation, design and manufacture of precision sensors for quality control, test and measurement and machine control. We provide customers with a wide selection of sensors fit for purpose, including precision digital and analogue dimensional LVDT Gauging probes, Displacement Sensors, Optical Linear Encoders, Non-Contact sensors and associated instrumentation. Our culture of striving to satisfy customer needs along with keeping ahead of innovation within our field have enabled us to grow into many markets, such as aerospace, automotive and electronics, with a global reach.

Providing measurement devices to the automotive, aerospace, electronics, materials, optics, semi-conductor and bearing industries,
you can be sure that wherever you are, whatever your application, we have the technology,the commitment and the resources to help you make it better.

More Less