Kanthal AB

P.O. Box 502, 734 27 Hallstahammar
Sörkvarnsvägen 1, 73427 Hallstahammar
Sweden
Telephone +46 220 210-00
Fax +46 220 211-66
info.kanthalde@sandvik.com

Hall map

glasstec 2018 hall map (Hall 13): stand B89

Fairground map

glasstec 2018 fairground map: Hall 13

Our range of products

Product categories

  • 01  Glass production/Production Technology
  • 01.04  Glass melting technology
  • 01.04.03  Melting technology for tank furnaces

Melting technology for tank furnaces

  • 01  Glass production/Production Technology
  • 01.04  Glass melting technology
  • 01.04.04  Melting technology for pot furnaces

Melting technology for pot furnaces

  • 01  Glass production/Production Technology
  • 01.04  Glass melting technology
  • 01.04.08  Electrically heated systems

Electrically heated systems

  • 01  Glass production/Production Technology
  • 01.05  Forming for flat glass
  • 01.05.01  Float glass technique

Float glass technique

  • 01  Glass production/Production Technology
  • 01.05  Forming for flat glass
  • 01.05.02  Glass drawing technique

Glass drawing technique

  • 01  Glass production/Production Technology
  • 01.05  Forming for flat glass
  • 01.05.03  Casting and rolling technology

Casting and rolling technology

  • 01  Glass production/Production Technology
  • 01.09  Kiln technology
  • 01.09.05  Pre-heating furnaces

Pre-heating furnaces

  • 01  Glass production/Production Technology
  • 01.09  Kiln technology
  • 01.09.06  Fusing Kilns

Fusing Kilns

  • 01  Glass production/Production Technology
  • 01.14  Photovoltaic production/Production Technologies
  • 01.14.01  Wafer production
  • 01.14.01.06  Other technologies for cell production

Other technologies for cell production

Our products

Product category: Electrically heated systems

Air heating cassettes

With Kanthal® air heating cassettes it is possible to heat air or gases up to 800°C (1470°F) and maintain a uniform temperature throughout the furnace. The air heating cassettes can be produced to fit most existing or new furnace designs. Installation is very simple in most cases.

More Less

Product category: Melting technology for tank furnaces

Furnace tubes

Extruded tubes made from Kanthal® APMT and Kanthal® APM iron-chromium-aluminium (FeCrAl) and nickel-chromium (NiCr) alloys for gas-heated or electrically heated furnaces.

More Less

Product category: Pre-heating furnaces

Heating modules

Kanthal® prefabricated heating modules are designed for a wide range of thermal processing applications up to 1700°C (3090°F) element temperature. Combining the best properties of electric heating and fiber or dense ceramic insulation, Kanthal® heating modules are suitable for the smallest laboratory furnace to the largest production furnace.

More Less

Our trade marks

SANDVIK HEATING