Manage stand orders
Select Option

Helantec GmbH

Werner-von-Siemens-Str. 47A, 76646 Bruchsal
Germany
Telephone +49 7251 85731
Fax +49 7251 85739
info@helantec.de

Contact

Jochen Weiss

Phone
+49 7251 85731

Email
jochen.weiss@helantec.de

Gregor Witrofsky

Phone
+49 7251 85731

Email
gregor.witrofsky@helantec.de

Please log in

You must be logged in to use matchmaking

Please log in for matchmaking

Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.

Let's get started!

Welcome to Matchmaking. Would you like to get in touch with ?

Our range of products

Product categories

  • 02  Glass processing and finishing
  • 02.08  Insulation glass technology
  • 02.08.05  Gas filling machines and gas devices

Gas filling machines and gas devices

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.02  Inspection technology
  • 05.01.02.03  Measurement, control and inspection of gas-filling levels

Measurement, control and inspection of gas-filling levels

  • 05  Measurement, testing, control technology and software
  • 05.01  Measurement and control technology, sensoring
  • 05.01.03  Measuring devices to be used on site

Measuring devices to be used on site

Our products

Product category: Gas filling machines and gas devices

RAPIDE L500

Our gas filling systems of RAPIDE series work with fast filling technology and can therefore be used universally, regardless of the type of gas (Argon, Krypton, Xenon, mixtures) and the pane dimension - even jumbo IG units can be filled with gas without any problems.

The filling process is started by pressing a button and then runs automatically until the pre-set filling level is reached. The filling speed and suction capacity are automatically adapted and regulated to the size of the IG units, to ensure that the filling process is laminar and without turbulences. This is the only way to achieve fast filling times with low gas loss.

We use our specially developed gas sensor to measure continuously the gas concentration. With high resolution and almost no wear, this sensor has a service life of more than 10 years!

Thanks to the integrated process control (short: IPC), all filling processes are automatically recorded, including barcode for clear tracking if required.

The well-known gas filling systems SMART 150, MINI or STANDARD from HELANTEC are suitable for special panes or low capacities.

More Less

Product category: Measurement, control and inspection of gas-filling levels

GAS TESTER

For quality control gas filled IG units we recommend our analyser type GAS TESTER. This analyser is characterized by its small, handy shape and ease of use. Sampling is performed with a special gas pump - only a small amount of gas is required. After 5 seconds measuring time only, the gas concentration (Argon, Krypton) is directly shown on the screen.

We use our extremely durable and almost wear-free gas sensor (these sensors are usually in use for more than 10 years). Therefore our analysers do NOT require annual routine maintenance in the factory!

Our analyser type GAS INSPECTOR is the first choice for digital documentation of quality control.
The measured gas concentration is saved together with the barcode of the IG unit, and if necessary also the production line. All data can be transferred to the company's internal quality management system or uploaded automatically via a network connection.

Of course, HELANTEC still produce the well-known analyzers ISO-GAS-Control and HELOX (residual oxygen measurement with paramagnetic measuring cell).

More Less

Product category: Gas filling machines and gas devices

ISO-Altimeter Professional

Our system, which was specially developed for pressure compensation of IG units with or without gas filling, is called the ISO Altimeter Professional.

Operation is intuitive using a touchscreen. The actual pressure balance, including process monitoring and leak testing, runs automated and reliable. The reading of production data from order files or directly from the barcode is also possible with this system. The user then only has to start the process by pressing a button, input errors are therefore excluded.

The data of all pressure-equalised units are automatically recorded for tracking and can be downloaded directly via the integrated FTP server.

The HELANTEC-valve ensures that the set pressure remains in the IG unit during and after pressure equalization. MPA Darmstadt has tested the HELANTEC-valve and confirmed that it meets the requirements of the IG industry. This allows simple and save pressure equalisation of gas filled IG units (for all common gases like argon, krypton, mixtures).

More Less

About us

Company portrait

GAS FILLING SYSTEM  |  ANALYSER  |  PRESSURE BALACNCE  |  QUALITY CONTROL  |  DOCUMENTATION

We have been developing devices for insulating glass production for more than 30 years. Thanks to innovative and user-friendly technology, all processes around gas filling, pressure compensation and quality control can be carried out with ease.

All devices are produced in Bruchsal (approx. 100 km south of Frankfurt) - Made in Germany. Thanks to the use of high-quality components, our devices do NOT require annual routine maintenance in the factory!

Due to constant further developments our devices are state of the art.

Our technology has been proven at many customers worldwide - we are happy to support your company with our knowledge and technology.

Company information as a PDF file